Enviar a United Kingdom , USD
Ver todas las categorías

Comentarios de Clientes

4.81 fuera de 5
Escribe un Comentario
  • Todos los comentarios (21)
  • Imagen (7)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(21)
    • 5 Estrellas(18)
    • 4 Estrellas(2)
    • 3 Estrellas(1)
    • 2 Estrellas(0)
    • 1 Estrellas(0)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
    • Total:
    • Precio:
    • Calidad:
    • Apariencia

    2019-01-29 06:56:10

    Here is how you get spindle motor speed control to it. You need only IRF530 fet and 180ohm resistor. Connect as in picture. Use heatsink for fet or bolt it to router frame. Use insulation. Now you can adjust voltage to spindle motor giving G-code Sxxx. S1000 gives 100% of voltage as S500 gives 50%. Example in console M03 S750 turns motor on and turns motor 75% of rated speed. Petteri Leino Finland

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia
    fräse angekommen

    2019-03-27 08:12:44

    War alles dabei außer EU klatgerätesteck

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia

    2019-04-11 09:48:11

    equipamento de ótima qualidade .

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia
    Good product but incomplete

    2018-10-07 08:30:00

    It lacks 2 stirrups and also 12 rectangular nuts for 20x20 aluminum profiles. With the nuts received the assembly stopped there. The supplier has put hex nuts in addition but it's DIY! See photo

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia
    value for money

    2018-07-21 06:50:25

    comes with perfect packing..looks good.. but have to pay custom duty here in local that expensive..some screws doesn't match.. no driver to connect with computer.. good product.value for money..excited

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia

    2019-05-08 07:16:21

    This is a great cnc. Very important to assemble it on a flat surface. Make sure y table is perfectly level. Must review grbl info on Web. Instructions for assemble should be better. Can say that properly set up this cnc does a very good job. I found it necessary to use two screws on the brass backlash y table threaded rod. If the table jams at the front the stepper will push out the brass bearing and the backlash control. It is nessasary to use hard limit switches to prevent jamming on all x y z

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia

    2019-05-06 04:55:06

    iyi çalışıyor

    Comentarios
    • Total:
    • Precio:
    • Calidad:
    • Apariencia

    2019-04-03 16:41:58

    Muy buen producto , relacion calidad precio .

    Comentarios
  1 2 3  

Puedes estar interesado

Encuesta de satisfacción

Descargar la APP y obtener extra cupón de 10%dto