Comentarios de Clientes

4.87 fuera de 5
Ver todos 337 comentarios
Escribe un Comentario
  • Todos los comentarios (337)
  • Imagen (33)
  • Video (2)
  • Todas Las Estrellas
    • Todas Las Estrellas(337)
    • 5 Estrellas(316)
    • 4 Estrellas(9)
    • 3 Estrellas(5)
    • 2 Estrellas(4)
    • 1 Estrellas(3)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 03/03/2022

    Con las bibliotecas correctas, funciona bien siempre y cuando no necesites agregar imágenes de mapa de bits SD en el Mega. Dado que los pines SPI son diferentes (11,12,13) para Uno y (51,50,52) para Mega. Necesitan saltadores.

    Comentarios
    Mostrar original
  • 31/05/2019

    very nice 3,5 disply. not yet tested, but it is manufactured very well and the package is very good and the unit it is very well protected during the shipment. satisfied. display 3,5 molto bello. non ancora testato, ma è prodotto molto bene e il pacchetto che lo contiene è molto ben fatto e l'unità è molto ben protetta durante la spedizione. soddisfatto.

    Comentarios
    Mostrar original
  • 05/04/2019

    Wonderful piece of hardware at a great price. The LCD uses parallel protocol and therefore needs many pins. But this makes display update very fast even with slow microcontrollers. It can display 16-bit colors (RGB565, a total of 65536 colors). To run the examples, I installed "Adafruit GFX" and "MCUFRIEND kbv" straight from the Library Manager in Arduino IDE. In this way I got the latest versions of these libraries. I only tested the shield at 5 V, but in theory it should work with 3.3 V, since the controller ILI9486 supports no more than 3.3 V (the shield comes with voltage regulator and 74LV245 shifters to make it 5 V compatible). It does not have a touchscreen (neither the product description claims it should have; I don't understand why some people complain about this).

    Comentarios
    Mostrar original
  • 16/01/2019

    I received the tft display quite fast. I attached the display shield to an Arduino Uno, installed the libraries as mentioned in the instructions provided, downloaded the sketches and the display showed the graphics and data as expected. Display is clear, with bright and rich colors. Very recommended

    Comentarios (1)
    Mostrar original
  • 27/03/2018

    Decent black levels and fair performance without too much of a load on the mcu. Be sure to download the "extras" which include example sketches, libraries, and the device datasheet. Many of the example sketches will fail to run unless you force the device identifier to 0x9481. One of the commenters nailed it when they said there's a bug in the TFTLCD library readID function. The colors look better in person than they do in the side-on picture I've uploaded, but that's what you can expect worst case. I haven't tested the sd card feature yet but I will when I get a working card from Banggood.

    Comentarios
    Mostrar original
  • 27/06/2016

    llegó en buenas condiciones es compatible con arduino UNO, solo que ocupa casi todos sus pines, por lo que mejor usarlo en un Mega, siempre que sea compatible, lo que aún desconozco...

    Comentarios
    Mostrar original
  • 30/03/2016

    Tested this out with the samples provided in the link. Works fine (after straightening pins), clean sharp colourful image. Happy with the quality of image and build and works straight away with the examples. Only negative would be that the pictures on the website show a box and was expecting it to be protected by that in shipping, it was not shipped in a box, it was in an antistatic bag inside a bubble wrap pouch and then in an plain envelope, it has foam on the pins to protect them but some of the pins were bent in the post, these straightened out okay without snapping and works okay.

    Comentarios
    Mostrar original
  • 15/10/2020

    Aunque estos se anuncian aquí como "productos que funcionan con las placas oficiales de Arduino", yo era capaz de conectar fácilmente esto con el STM32 "Blue Pill" placa de desarrollo también se vende aquí en Banggood. Funciona perfectamente con el STM32. Bonito color y una resolución nítida.

    Comentarios
    Mostrar original
  • 04/04/2020

    Llegamos rápido y en buen estado debido a un buen empaque. Totalmente funcional y muy fácil de usar. En serio te recomiendo esta exhibición.

    Comentarios
    Mostrar original
  • 29/04/2016

    Упаковано в пупырку, все в целости, продавец хорошо упаковал. Соответствует картинке. Respect

    Comentarios
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$27.71
    • US$39.99
    • US$4.99
    • US$5.99
    • US$3.19
    • US$129.99
    • US$24.24
    • US$19.99
    • US$11.49
    • US$20.69
    • US$25.29
    • US$34.94
    • US$10.99
    • US$12.99
    • US$31.99
    • US$16.16
    • US$8.99
    • US$13.89