EleksMaker® LA03-300 405nm 300mW Violet Dot Módulo láser con soporte para grabador láser DIY
Una parte de la reseña se ha traducido automáticamente.
I install this laser module on my DIY CNC Router. I switch Laser ON/OFF using Spindle relay output. Best results were achieved with feed speeds from 3 to 5mm per second. This laser easily cut paper (80gram), Tejin Fabric (usually used on Paraglider/Parafoil/Kite canopies), and I carve medium grade Balsa, and White Poplar Plywood. I mount laser module into the aluminum square tube 40x40mm and install a mini fan, 12 V 40mm square fan from an old graphic card) to achieve efficient cooling. Carving of Balsa and Plywood are shown in my video on youtube: https://www.youtube.com/watch?v=g64yPKej5Qg
Prévu pour faire de la découpe sur Dépron, une fois la focale ajustée, la plaque est percée et découpée (au par avant il faut la noircir..). Consommation 300mA sous 5V. Paire de lunette obigatoire!