Una parte de la reseña se ha traducido automáticamente.
Muy bien.
These are really nice, and they provide a stable power source at 3V3 and 5V. However, the switch does not appear to have any effect on the power supplied on the solder pads. As such, I'm not sure the undercurrent protection works when using those. I'm using protected 18650 batteries so I don't really care.
Como se describe. Totalmente cargada.
llegó en buen estado. Espero que funcionen como se describe. La mejor manera de impulsar un proyecto arduino.
producto muy útil
ok ok ok no probado
Tis módulo es tan grande! 5 y 3.3 v de una celda de LiON. ¡Me encanta! Gracias!!
Recibido temprano y bien empaquetado, cada uno en su propia bolsa libre de estática. Se utilizará para alimentar algunos microcontroladores para varios proyectos. Otros comentarios son correctos que el interruptor sólo enciende / apaga el puerto USB. Usted puede ver que si usted sigue las pistas en la PCB. (Sugerencia - Usted debe mirar de cerca e inspeccionar todos los nuevos artículos electrónicos que utiliza.) La unidad parece estar muy bien hecha y todos los componentes están bien soldados y claramente etiquetados. La forma en que anticipo su uso no requerirá una base, pero se puede considerar para espacios estrechos o aplicaciones que requieren que se mueva mucho, golpeó alrededor, o si la unidad estará expuesta a alta humedad. Las diferentes salidas aceptan pines de cabecera fácilmente. Gran relación calidad-precio si se obtiene paquete de 5 unidades. Muy feliz y satisfecho!
Already bought five units over four months ago. They all work great, for Arduino projects, led lights, a quick 3.3v / 5v power supply using a single 18650 Samsung 30Q flat top battery. Two drawbacks, 1. SMD components on the bottom of the PCB can be shorted out and get broken off, so you need to add a base plate. A thin piece of wood of plastic. 2. Flat top batteries have a hard time making a good electrical connection. A. need to bend the battery contacts in towards the battery compartment or, B. add a 4x2mm disk magnet to the positive end of the battery or, C. or solder a small brass washer to the positive end of the battery or, D. use button top 18650 batteries. This will help a lot in making the dc to dc step up buck converter more reliable.
correcto