Comentarios de Clientes

4.92 fuera de 5
Ver todos 106 comentarios
Escribe un Comentario
  • Todos los comentarios (106)
  • Imagen (4)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(106)
    • 5 Estrellas(102)
    • 4 Estrellas(2)
    • 3 Estrellas(0)
    • 2 Estrellas(1)
    • 1 Estrellas(1)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Honduras)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 30/08/2016

    The USB casing snaps together, so it can be opened. My multi-meter shows there is 5 volts on the red wire. The red wire is soldered to a pad labelled 5 v. There is an unoccupied 3.3 v pad, so it seems the voltage could be changed with a soldering iron. Note that the description says the logic levels are fixed at 3.3v. There are no LEDs. The device works as expected when used to connect a GPS module to my PC.

    Comentarios (1)
    Mostrar original
  • 27/02/2018

    This converter is automatically recognized by my Windows 10 64bit as a real FTDI adapter. No fiddling with device drivers installations. Very satisfied !

    Comentarios
    Mostrar original
  • 26/08/2019

    Thanks

    Comentarios
    Mostrar original
  • 14/09/2018

    arrived in 26 days product matches description and is of good value for money

    Comentarios
    Mostrar original
  • 31/12/2020

    Todos los mejores

    Comentarios
    Mostrar original
  • 30/01/2018

    Produit conforme et fonctionnel et reconnu immédiatement sous Windows 10. Mise à jour du firmware d'un Sonoff 4CH PRO sans problème. Attention toutefois : la tension de sortie est de 5V uniquement. Certains modules Sonoff nécessitant du 3.3V, j'ai donc commandé "FTDI Basic Program Downloader USB-TTL 3.3 / 5V FT232 For Arduino" afin d'avoir 3.3V et 5V de tension pour la mise de différents modules domotiques. Je déposerai un second avis sur cet autre adaptateur FTDI.

    Comentarios
    Mostrar original
  • rvtVIP2
    NL
    20/01/2018

    I bought one of the little ESP8266 modules from Arilux with the idea to re-program. This worked straight out of the box using the tutorial found here https://github.com/mertenats/Arilux_AL-LC0X 10/10 would buy again

    Comentarios
    Mostrar original
  • 19/10/2016

    It works perfectly, but be aware that the red/black power pins deliver 5 volts. And that the rxd/txd are 3v3 tolerant. zo you have to use the Rxd with a 10k or 4k7 ohm resistor. All-and-all it's a good product for use in my microcontroller projects.

    Comentarios
    Mostrar original
  • 19/09/2018

    Had to open it and solder the vcc cable to the 3.3v pad. Haven't been able to program my openlrsng transmitter yet, could be missing the bootloader or the adapter is bad.

    Comentarios (1)
    Mostrar original
  • 29/10/2017

    The connector is not labeled so you either need to guess or open the USB connector and figure out the colors on your own. Otherwise it seems to be a real FT232RL chip. Works as expected.

    Comentarios (1)
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$3.99
    • US$6.99
    • US$15.99
    • US$8.99
    • US$5.99
    • US$2.99
    • US$14.49
    • US$7.99
    • US$5.99
    • US$15.99
    • US$6.99
    • US$8.99
    • US$8.99
    • US$14.20
    • US$8.99
    • US$9.99
    • US$5.99
    • US$6.99