OK to power my 144 RGB leds/m strip. I haven't test to supply 10 A ... However, I bought a 10A power supply to power a 2.30 A led strip ... I think there is an isue for the led strip. Should be 8.16 A max, not 2.30 A at full power ... CNCEVER

OK to power my 144 RGB leds/m strip. I haven't test to supply 10 A ... However, I bought a 10A power supply to power a 2.30 A led strip ... I think there is an isue for the led strip. Should be 8.16 A max, not 2.30 A at full power ... CNCEVER

OK to power my 144 RGB leds/m strip. I haven't test to supply 10 A ... However, I bought a 10A power supply to power a 2.30 A led strip ... I think there is an isue for the led strip. Should be 8.16 A max, not 2.30 A at full power ... CNCEVER

El caso fue destrozado en las esquinas pero en general parece estar bien

The case was smashed on the corners but in general it seems to be okay

El caso fue destrozado en las esquinas pero en general parece estar bien

i puerta y sus buenas condiciones

i gate and its good conditions

i puerta y sus buenas condiciones

Overall use of aluminium with mesh design on top and sides provide for good looks and excellent cooling. It also comes with pre-made mounting holes on the bottom and right side of the terminals, so you can easily mount it anywhere you want. The case is well grounded so no worries from an electrical shock. It works out of the box but you might have to fine tune the output voltage using the Vadj trimm pot on the unit, mine was off about 0.15V. Haven't stress tested it under full load yet but so far it works perfectly. Would recommend.

Overall use of aluminium with mesh design on top and sides provide for good looks and excellent cooling. It also comes with pre-made mounting holes on the bottom and right side of the terminals, so you can easily mount it anywhere you want. The case is well grounded so no worries from an electrical shock. It works out of the box but you might have to fine tune the output voltage using the Vadj trimm pot on the unit, mine was off about 0.15V. Haven't stress tested it under full load yet but so far it works perfectly. Would recommend.

Overall use of aluminium with mesh design on top and sides provide for good looks and excellent cooling. It also comes with pre-made mounting holes on the bottom and right side of the terminals, so you can easily mount it anywhere you want. The case is well grounded so no worries from an electrical shock. It works out of the box but you might have to fine tune the output voltage using the Vadj trimm pot on the unit, mine was off about 0.15V. Haven't stress tested it under full load yet but so far it works perfectly. Would recommend.

Arrived on time. The first unit was only reading 3.3volts but this replacement is right on the money. Have created a nice power unit with this and all works ok

Arrived on time. The first unit was only reading 3.3volts but this replacement is right on the money. Have created a nice power unit with this and all works ok

Arrived on time. The first unit was only reading 3.3volts but this replacement is right on the money. Have created a nice power unit with this and all works ok

acheté pour led ws2812. semble correct pour le prix. pas encore testé. merci banggood

acheté pour led ws2812. semble correct pour le prix. pas encore testé. merci banggood

acheté pour led ws2812. semble correct pour le prix. pas encore testé. merci banggood

I tested it with 45W LED strip. Works good. I received it after 1 month. Good packaging.

I tested it with 45W LED strip. Works good. I received it after 1 month. Good packaging.

I tested it with 45W LED strip. Works good. I received it after 1 month. Good packaging.

Nice compact PSU, too bad that there isn't a 15A version of it. It looks well constructed, and there is a plastic protection above the connector screws.

Nice compact PSU, too bad that there isn't a 15A version of it. It looks well constructed, and there is a plastic protection above the connector screws.

Nice compact PSU, too bad that there isn't a 15A version of it. It looks well constructed, and there is a plastic protection above the connector screws.

This power supply is very well suited for DIY videowall displays. Stable power supply with high efficiency and low dissipation.

This power supply is very well suited for DIY videowall displays. Stable power supply with high efficiency and low dissipation.

This power supply is very well suited for DIY videowall displays. Stable power supply with high efficiency and low dissipation.

Arrived on time, seems great!

Arrived on time, seems great!

Arrived on time, seems great!