Una parte de la reseña se ha traducido automáticamente.
Gran producto
I was able to mount this directly to my Ender 3 V2 stock mount using 2X 25MM M3 screws by tapping then drilling out paths in the top fin of the heat sync. I did this by removing the stock hot end and using it to center the screws and using spare M3 screws to tap the Heat sync. I then drilled out the paths using the tap as a guide. I was also able to transfer the Ender hot end and heat break as well. I didn't use any of the electronics. You will need to print a custom fan shroud. As for the parts, nothing premium here. All basic cheap parts but made with precision. I cant speak for the electronics. Side note, There is a custom PTFE insert called a throat I think. It would be great if Banggood sold spares. It is a 7mm to 4mm OD reducer that funnels the filaments into the hot end. The 2 in 1 out version also has one, but it's shorter.
vino perfecto
El artículo llegó de forma segura y a tiempo, el embalaje se dañó un poco, pero el hotend no se dañó. la calidad es buena aunque no he instalado la unidad todavía pero no espere ningún problema.
No probado todavía, pero se actualizará cuando lo he utilizado, pero la calidad sabia es realmente bueno, mejor de lo que pensé para ser honesto. Dale al vendedor una oportunidad...
Muy recomendable
3rd class service by banggood . after 10 time conntrack 100 days to resive
¡No puedo esperar a usar mi extrusora 3 en 1! 😀😃
perfecto no puede remolcar esto
exelent