Producto como descripción. Ensamblamos el kit de diy y probamos bien, trabajando como se suponía. Buen producto. Recomiendo.

Product as description. Assembled the diy kit and tested ok, working as supposed. Good product. Recommend.

Producto como descripción. Ensamblamos el kit de diy y probamos bien, trabajando como se suponía. Buen producto. Recomiendo.

I do not like writing reviews, but this time I could not miss it. Well, this that the output packet was damaged (a nasty hole) and internal also had broken bottom I assume as a normal transportation risk. See picture 1 what came (left) and what was expected (right). But later - on picture 2 you see the buzzer and its place on the boards - the hole distance is 5-10% larger than necessary. Then, IC2 and IC3 have to be SMD type on the board, sent PDIP type - see picture 3 Also, Rp1 is wrong type - picture 4 Picture 5 is from the product page and shows what is expected to be. To finish, let us return to picture 1, right side, and see the red arrows - even on the product page it was promised what to expect, but I missed it. SO, DO NOT ORDER EXACTLY THIS KIT

I do not like writing reviews, but this time I could not miss it. Well, this that the output packet was damaged (a nasty hole) and internal also had broken bottom I assume as a normal transportation risk. See picture 1 what came (left) and what was expected (right). But later - on picture 2 you see the buzzer and its place on the boards - the hole distance is 5-10% larger than necessary. Then, IC2 and IC3 have to be SMD type on the board, sent PDIP type - see picture 3 Also, Rp1 is wrong type - picture 4 Picture 5 is from the product page and shows what is expected to be. To finish, let us return to picture 1, right side, and see the red arrows - even on the product page it was promised what to expect, but I missed it. SO, DO NOT ORDER EXACTLY THIS KIT

I do not like writing reviews, but this time I could not miss it. Well, this that the output packet was damaged (a nasty hole) and internal also had broken bottom I assume as a normal transportation risk. See picture 1 what came (left) and what was expected (right). But later - on picture 2 you see the buzzer and its place on the boards - the hole distance is 5-10% larger than necessary. Then, IC2 and IC3 have to be SMD type on the board, sent PDIP type - see picture 3 Also, Rp1 is wrong type - picture 4 Picture 5 is from the product page and shows what is expected to be. To finish, let us return to picture 1, right side, and see the red arrows - even on the product page it was promised what to expect, but I missed it. SO, DO NOT ORDER EXACTLY THIS KIT

Good quality PCB with all components present.

Good quality PCB with all components present.

Good quality PCB with all components present.

bien

good

bien

Quuick Entrega quility ok

Quuick Delivery quility ok

Quuick Entrega quility ok

Buenos días. Pasco recibo artículo. Nota recibida este artículo. Gracias.

Bonjour. Pas recu cette article. Note received this article. Thank you

Buenos días. Pasco recibo artículo. Nota recibida este artículo. Gracias.

De acuerdo. Producto como se describe.

Ok. Product as described.

De acuerdo. Producto como se describe.

Nice DIY kit for beginners.

Nice DIY kit for beginners.

Nice DIY kit for beginners.

Great kit, not for beginners

Great kit, not for beginners

Great kit, not for beginners

ok

ok

ok