Una parte de la reseña se ha traducido automáticamente.
Motor más barato y más potente en precio. Su cuerpo y los cables son muy delgados, pero no se calienta a toda velocidad. Debe comprar el producto.
Gracias, ha llegado.
Los motores están funcionando bien. Buena calidad.
Muy pequeño pero gran motor. Lo conecté a una escolta y lo probé usando un servomotor. Funcionó muy bien y sólo deseo haber comprado más.
Me gustó solo no se dio cuenta de que no había postura
Funciona muy bien como un tirador no han probado la configuración del empujador.
The quality is perfect. CNC machined. Rotates in his axis without wobbling. The cable is long so you can connect them directly to this kind of new 4 in 1 ESCs stacks. KV are real 2280KV. The shaft diameter is M5 and the weight in a precision scale is 20g. Used with 3s 1500mah battery and works like a charm. Also tested with 5058 propellers. If you also need some cosmetic design this is the perfect one because of the CNC machining terminations. They are great. Recommeded 100%
This is the second motor that I bought. I have tested it and it works well. Thrust on 2s (full battery) with a 5x4 prop is just over 200 grams (as in the specs.). Flight time (mostly full throttle) on 850 mAh, 2s with the 5x4 prop is close to 15 minutes and when I am just floating around, flight times are 25 minutes.This means that at full speed the motor draws just under 4A. The esc I use is 12A, but I think that 6A (constant) would suffice with this set-up.
I bought this motor together with the SimonK 10A ESC and Kinkong/LDARC 5040 propellers. The motor is very well made, the leads are silcone and will not break off when moved. The motor runs well and does not get warm with this set-up. However, thrust is (in my case) more likely around 150g (battery = Zippy Compact 850 mAh 2s - was not full), as the model (184g) is not supported by the thrust of the motor.
I came from PM1806 "plastic motor" and the DXW D1806 are for sure more powerful on the same setup (3S 1600me / 10A ESC / 5030 prop) But they're getting crazy hot, after 2-3 minutes the prop screw became too hot for my fingers! And the motor smells like wires are melting... I don't know if my motors are defective, but all 4 of them ?