DYS 30.5x30.5mm Flytower Omnibus F4 Pro Controlador de Vuelo + F30A 4 en 1 BLHeli_S ESC Dshot600
Una parte de la reseña se ha traducido automáticamente.
I used this on my LOS acro build while using 4.5mm rubber anti-vibe fixed screws to mount the DYS F30A I got away with using 20mm standoffs and it gave me a little over 2 mm clearance from the top plate. it made my build very easy and very clean looking and it has held up very well through many hard crashes and some rain.My only problem is the connector that connects the DYS F30A and DYS F4 Pro has started to come loose I can see that the epoxy it releasing around the connector. I would like to see an improvement in the connector since it susceptible to pulling away from the board.
Hello dear banggood team I got the dys tower from you and I connected it with a lipo to mesher the output. The components get really hot an I only have 1.34 v in the outputs!? I think the IC have a problem! Place give me a feedback to this problem. Thanks