Comentarios de Clientes

4.95 fuera de 5
Ver todos 1060 comentarios
Escribe un Comentario
  • Todos los comentarios (1060)
  • Imagen (174)
  • Video (19)
  • Todas Las Estrellas
    • Todas Las Estrellas(1060)
    • 5 Estrellas(1023)
    • 4 Estrellas(28)
    • 3 Estrellas(6)
    • 2 Estrellas(1)
    • 1 Estrellas(2)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 25/12/2016

    Take the E010 canopy off, install camera on top of PCB board using mounting foam tape and finally secure with rubber band. For Removability, solder on the included male power lead to the + and - terminals on the PCB board. With stock 150mah 30c battery for the E010, I get 3:30 gentle flight time, or 2:30 VERY aggressive flight time.

    Mostrar original
  • 10/10/2016

    The TX01 is the smallest and lightest camera/VTX I own, It's perfect for anyone needing a camera for there tiny whoops, QX90's -105 - 110, etc... You can even install it on a mini racer. In my video, I actually have it on a 190mm frame! Works perfect, albeit I didn't fly very far- Ive been having radiolink tx issues Nonetheless, the 25mW VTX provided me with clear transmission with very little spurts of static. Excellent construction, and an intuitive intreface that makes using it a pleasant experience. Highly recomended! I also want to mention the antenna, it is a nickel plated RHCP skew planar antenna. Unlike the antennae on some of my other mini VTX/Cam combos, the one on the TX01 is able to retain shape much better, I have been getting great transmission as well. Pros: Tiny! Light Clear picture/ signal Easy to use, one button does it all Durable antenna that is able to hold shape Clear bright LED that cycles constantly and will tell you current ch. /freq/ Cons: I haven't settled on whether this is a good thing or a bad thing yet, I guess for now it's "PRON" not good or bad. Time will tell Adhesive over the power cables contacts- if the wires break, it will be difficult to solder on new wires due to adhesive covering contacts

    Mostrar original
  • 23/11/2017

    Apparently, the only difference between the TX01 and TX02 is the output power. While TX01 has 25 mW, the TX02 has 200 mW. This should not fool you, theoretically, 200 mW should give you only about twice the range compared to the 25 mW. In my opinion, for indoor flight and proximity park flying will be just perfect the Eachine TX01. It is also a bit lighter and consumes less power.

    Mostrar original
  • 05/09/2017

    First FPV cam i've ever bought. The quality is GREAT! Soldered this bad boy onto my Furibee F36 to do some tiny whooping and it was a blast!!!! Very easy to use. Nice quality. Clear image. Does okay outside as long as there's not solid objects in the way. Very light for a 3-5" quad, but adds noticeable weight to small micros. Still a bargain at $9!! I bought 2x and would buy again!!!

    Mostrar original
  • 22/07/2017

    Small and lighhtweight. Easy to handle with the 7-seg display and pushbutton. Cloverleaf is a 4-leaf-type which is a little strange for a 5.8GHz TX, but is works fine, also with my PAL-designed FPV ground station. Cable polarity is adapted to Horizon microplanes Lipo polarity now, fine! Focus distance is very narrow (starting at a few cm distance), view angle is very wide (ca. 120°, see uploaded photo) which makes it suitable for indoor FPV use... PCB has lots of welding fluid traces, but everything works fine. Overall very good value!

    Mostrar original
  • 15/01/2017

    When you first open the box, you are amazed at how small it is. You pick it up and can barely feel it in your hand. You power it on and the vibrant blue screen grabs your attention and is very easy to understand. This is a fantastic camera and works excellent for a micro quad like a hubsan X4. There are newer cameras out there but this one has the track record you can count on. One thing i believe could use improving is the antenna. The clover lobes are slightly warped from an ideal arrangement but i dont know if this effects transmission quality and is easy to fix. To save weight you can also add your own dipole whip antenna.

    Mostrar original
  • 18/11/2016

    Like Vader would say: "Very impressive". This all in one cam+vTX combo has surprised me too much. First, is really really tiny in hand and looks good and robust (except the antenna). Performance is out of doubts: good image quality, enough range, not too much battery drain, works well in low light conditions... No more to say... If you're searching for this style of item... Don't think two! PS: The price is growing lastly, I fortunately got this for an incredible 19€

    Mostrar original
  • 08/11/2016

    The contrast is good, and the color balance is correct. The boards are potted in epoxy for less impact damage and better component adhesion. The antenna is less fragile, being plated with nickel, and has a lower profile for better proximity flying. More lobes (4 instead of 3) might mean more uniform signal output. The filtering seems better also, having no motor noise even in a low battery condition. Good design improvement, same low price. Now let's make it stereo / 3D.

    Mostrar original
  • 04/11/2016

    Had a hard time finding channels for my other wl toys monitors to share on, but got it, and works better than my old 798T for picture quality hands down IMHO. This is mounted on a E010 I bought on here with just some double sided tape and a lacky band loosely over it. took all of 7 minutes for the conversion. I also extended the sticks on the controller. But looks like I have to get a Taranis pretty bad... Going to try this ones bigger brother TX02 on a 90mm frame I print myself, Review of it coming soon.

    Mostrar original
  • 24/08/2018

    Die Kamera ist wirklich empfehlenswert für den Einbau in einen kleinen Kopter wie die F36. Recht geringer Stromverbrauch, Flugzeit so 3-4 min. Gutes Bild. Durch 25MW Sendeleistung in Deutschland erlaubt, die Reichweite ist im Haus aber sehr gering. Im Ersten Stock geht schon fast nichts mehr. Im Garten so Schätzungsweise 30-40m. Die Cloverleaf Antenne ist zwar gut, aber sehr empfindlich bei Abstürzen. Sie verbiegt tatsächlich ziemlich stark, selbst bei 25g Kopter Gewicht. Da ist eine normale Stabantenne wesentlich unempfindlicher.

    Comentarios (1)
    Mostrar original

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$16.71
    • US$17.99
    • US$34.99
    • US$119.90
    • US$17.90
    • US$31.50
    • US$22.50
    • US$20.85
    • US$18.50
    • US$105.99
    • US$16.50
    • US$299.99
    • US$25.99
    • US$569.00
    • US$369.00
    • US$559.99
    • US$99.99
    • US$34.64