Detalles precisos:
Eachine US65 DE65 PRO 65mm 1-2S Brushless Whoop FPV Racing Drone BNF CrazybeeX F4 FC CADDX ANT Cam 0802 14000KV Motor
Eachine US65 / DE65 PRO whoop comes with watertransfer craft and a New AIO 4 IN 1 CrazybeeX flight controller. The weight only 24g. High performance 2.0 plug design supporting up to 2S Lipo and 5A continuous current for each ESC. Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera give you a highly view. Simply bind it to your transmitter then you are ready to enjoy your all-new Eachine US65 / DE65 PRO.
Manual and diff for US65 DE65 PRO, Click Here.
Especificaciones：
Nombre de la marca: Eachine
Item Name: US65PRO DE65PRO
Wheelbase: 65mm
Size: 81mmx81mmx39mm
Take off weight: 24g(without battery)
Características:
24gram 1-2s brushless 65mm whoop
New AIO 4in1 CrazybeeX flight controller
Smooth and powerful
CADDX HORMIGA Cámara
High performance ET2.0 plug
Advantage compared to the PH2.0
★Solve the voltage sag problem
★15A continuous current, 20A burst
★ Conector banana dorado de 1,0 mm que reduce la resistencia interna
Opción de receptor:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
External Frsky RXSR receiver version(ACCST D16 sbus output)
External TBS Crossfire Nano receiver version
controlador de vuelo | (Frsky SPI RX version) CRAZYBEEX FR V1.0 FC Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target: CrazybeeF4FS (External Frsky RXSR version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX (External TBS CRSF NANO version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 2.9V-8.7V)
5A incorporado (cada uno) Blheli_S 4in1 ESC Dshot600 listo
Betaflight OSD integrado (control SPI)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver or no receiver
Empotrado 5V 1A BEC
Detección de voltaje incorporada |
Motor | Mode: NX0802 14000KV
Configuración: 9N12P
Diámetro del estator: 8 mm
Longitud del estator: 2 mm
Diámetro del eje: Φ1 mm
Dimensión del motor (diámetro * largo): Φ10,5 mm * 14,9 mm
Peso (g): 1,7 g
No. de células (Lipo): 1-2S |
ESC 4 en 1 a bordo | MCU actualizado a EFM8BB21 Power supply: 1-2S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds)
Soporte BLHeliSuite programable
Factory firmware: S_H_50_REV16_7.HE*
Default protocol: DSHOT600 |
Propellers | Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm |
Onboard 5.8g VTX | Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
Con banda de carrera Smartaudio ready |
Caddx ANT 1200tvl camera | Sensor de imagen: Sensor CMOS de 1/3" Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lente: 1,8 mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: SÍ WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.) |
lipo Batería | Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 55mmx12mmx7mm
Weight: 6.5g Connector: ET2.0 |
Multi port Lipo/Lihv battery charger | Weight: 41g
Dimensions: 82x51x22mm
Input: DC 7V-22V
Output switchable: Fixed at 200~600 milliamps
Cutoff voltage switchable:
4.20v cell charging cutoff (+- 0.5% margin of error) for 1S lipo Batería
4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery |
Onboard Frsky SPI receiver Version | Onboard Frsky SPI D8 receiver Version
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model Canales: 8ch
soporte a prueba de fallas
Sin interferencia de tierra (transmisor y receptor a 1 m del suelo): 100 m ~ 200 m Onboard Flysky SPI receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Canales: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
soporte a prueba de fallas |
External Frsky R-XSR receiver version
| Weight: 1.5g Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel) Operating Voltage Range: 3.5V~10V Operating Current:70mA@5V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCESS Protocol ( Upgrade firmware) |
Versión de receptor externo TBS CRSF Nano
| Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible |
El paquete incluye:
1 x US65 PRO or DE65 PRO Whoop Frame and canopy
1xReceptor
Option1: CrazybeeX FR V1.0 built-in internal Frsky SPI D8/D16 receiver
Option2: CrazybeeX FS V1.0 built-in internal Flysky SPI receiver
Option3:CrazybeeX PNP V1.0 with External Frsky RXSR receiver
Option4:CrazybeeX PNP V1.0 with External TBS crossfire nano receiver
4 x Eachine NX0802 KV14000 brushless motor
1 x Gemfan 1219-3 Propellers(4cw+4ccw)
1 x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
1 x 5.8G 25mw 40ch vtx (controlador de vuelo built-in)
4 x 1S 250mah 30C LiHV Battery
1 x Multi port LIPO/LIHV Battery Charger with 12V adapter
1 x Screw Driver
1 x Propeller disassemble tool
1 x Eachine Handbag
