Awesome Product Value fir money fastest delivery Thank you Banggood

Awesome Product Value fir money fastest delivery Thank you Banggood

Awesome Product Value fir money fastest delivery Thank you Banggood

Tiene buena calidad de luz, pero no podía encajarlo en mi lámpara como una actualización, tuvo que modificar ligeramente.

It has good light quality, but I couldn't fit it to my lamp as a retrofit, had to modify slightly.

Tiene buena calidad de luz, pero no podía encajarlo en mi lámpara como una actualización, tuvo que modificar ligeramente.

product arrived within a week and works perfectly

product arrived within a week and works perfectly

product arrived within a week and works perfectly

Thanks

Thanks

Thanks

Since LED lamps in this model are not (yet?) available in my country, I'd tried my hand at this one. It replaces a TL it was modelled after. Now this calls for some minor modification to the whole set up, you can't just plug in this LED device. A TL has a rather big (igniter) coil in series, you dont want that for a LED lamp. This one requires a clean 230 V supply. All I did was taking the coil out of the circuit, replacing it with a plain, insulated wire. WARNING: do all this work with the mains switched off, you could easily knock yourself out (or worse) when not doing so! As my lamp iss contolled by a motion sensor with a relay, something else in the circuit turned out to be not OK for a LED lamp as well. With the sensor switched on, all was fine, there was roughly 2 times the amount of light I ever had from the TL. Really, really good! But when it switched off after no motion had been detected for a while, the lamp kept flashing faintly and briefly, every 15 seconds or so... After inspection I noticed in the controller there was a capacitor across the realy contacts, leaking enough energy to the lamp thereby storing enough energy, igniting it occasionally. A capacitor like this is meant to suppress sparking at the relaycontacts ( that's what they'll usually do when loaded with a big inductor (coil), But since the coil was taken out, I took out this capacitor as well. Now it's dark when supposed to and there’s a BRIGHT light shining when expected. The warm white I chose is very much like the colour of the previous TL so that's perfectly fine with me. But don't expect a warm, halogen like light. 5 out of 5 points from me for this great lamp!

Since LED lamps in this model are not (yet?) available in my country, I'd tried my hand at this one. It replaces a TL it was modelled after. Now this calls for some minor modification to the whole set up, you can't just plug in this LED device. A TL has a rather big (igniter) coil in series, you dont want that for a LED lamp. This one requires a clean 230 V supply. All I did was taking the coil out of the circuit, replacing it with a plain, insulated wire. WARNING: do all this work with the mains switched off, you could easily knock yourself out (or worse) when not doing so! As my lamp iss contolled by a motion sensor with a relay, something else in the circuit turned out to be not OK for a LED lamp as well. With the sensor switched on, all was fine, there was roughly 2 times the amount of light I ever had from the TL. Really, really good! But when it switched off after no motion had been detected for a while, the lamp kept flashing faintly and briefly, every 15 seconds or so... After inspection I noticed in the controller there was a capacitor across the realy contacts, leaking enough energy to the lamp thereby storing enough energy, igniting it occasionally. A capacitor like this is meant to suppress sparking at the relaycontacts ( that's what they'll usually do when loaded with a big inductor (coil), But since the coil was taken out, I took out this capacitor as well. Now it's dark when supposed to and there’s a BRIGHT light shining when expected. The warm white I chose is very much like the colour of the previous TL so that's perfectly fine with me. But don't expect a warm, halogen like light. 5 out of 5 points from me for this great lamp!

Since LED lamps in this model are not (yet?) available in my country, I'd tried my hand at this one. It replaces a TL it was modelled after. Now this calls for some minor modification to the whole set up, you can't just plug in this LED device. A TL has a rather big (igniter) coil in series, you dont want that for a LED lamp. This one requires a clean 230 V supply. All I did was taking the coil out of the circuit, replacing it with a plain, insulated wire. WARNING: do all this work with the mains switched off, you could easily knock yourself out (or worse) when not doing so! As my lamp iss contolled by a motion sensor with a relay, something else in the circuit turned out to be not OK for a LED lamp as well. With the sensor switched on, all was fine, there was roughly 2 times the amount of light I ever had from the TL. Really, really good! But when it switched off after no motion had been detected for a while, the lamp kept flashing faintly and briefly, every 15 seconds or so... After inspection I noticed in the controller there was a capacitor across the realy contacts, leaking enough energy to the lamp thereby storing enough energy, igniting it occasionally. A capacitor like this is meant to suppress sparking at the relaycontacts ( that's what they'll usually do when loaded with a big inductor (coil), But since the coil was taken out, I took out this capacitor as well. Now it's dark when supposed to and there’s a BRIGHT light shining when expected. The warm white I chose is very much like the colour of the previous TL so that's perfectly fine with me. But don't expect a warm, halogen like light. 5 out of 5 points from me for this great lamp!

molto luminose durata da testare

molto luminose durata da testare

molto luminose durata da testare

xxx

xxx

xxx

The product is nice and look durable

The product is nice and look durable

The product is nice and look durable

The G23 lamps meet very well as a substitute for the coneventionele G23 lamps consume less electricity, thanks also to turn off the ballast, at least 50% savings. And arrived safely thanks to the good packaging.

The G23 lamps meet very well as a substitute for the coneventionele G23 lamps consume less electricity, thanks also to turn off the ballast, at least 50% savings. And arrived safely thanks to the good packaging.

The G23 lamps meet very well as a substitute for the coneventionele G23 lamps consume less electricity, thanks also to turn off the ballast, at least 50% savings. And arrived safely thanks to the good packaging.

Works perfectly and is perfect if you want too cut your bill

Works perfectly and is perfect if you want too cut your bill

Works perfectly and is perfect if you want too cut your bill