Comentarios de Clientes

4.84 fuera de 5
Ver todos 80 comentarios
Escribe un Comentario
  • Todos los comentarios (80)
  • Imagen (15)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(80)
    • 5 Estrellas(73)
    • 4 Estrellas(4)
    • 3 Estrellas(1)
    • 2 Estrellas(1)
    • 1 Estrellas(1)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Honduras)
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 10/05/2021

    Muy buena calidad

    Comentarios (1)
    Mostrar original
  • 21/09/2021

    Buen jop

    Mostrar original
  • 09/09/2021

    Lo tengo, pero no me voy a esclavizar como si uno de los disipadores de calor no estuviera soldando o apuntando. Seguramente el dispositivo no fue probado a la salida de fábrica!!!!!. ¿Qué debo hacer? Colin PHILLIPS

    Comentarios (1)
    Mostrar original
  • 24/11/2019

    using a 48VDC 75A rectifier i have been able to push limits without issues - see display readout made a few modifications and repairs: the fan screws were bent and striped - replaced with new studs and screws. also replaced fans with that have more airflow heat-sinks for mosfets were broke from board - used thermal tape for mosfets to stick on heat-sinks and basically super-glued sinks to board to hold in place heat insulating tube around coil heat shield between coil and driver water cooled with radiator overall, i am happy with performance now with the changes i have made

    Comentarios (1)
    Mostrar original
  • 20/04/2018

    El producto tal cual en el de la imagen recomiendo al vendedor 👍muy bien embalado y la entrega súper rápida llego en 8 días a Perú 🇵🇪 😎

    Comentarios (2)
    Mostrar original
  • 26/04/2018

    Many uses for this product the head will make an consumable of your Graphite Crucible Cup so you have to find an other pot to use in your smelter and pour the molten material in the crucible cup. Dit some reversed soldering on the 3 fase terminals of an controller. more to come

    Comentarios (2)
    Mostrar original
  • 04/01/2018

    Arrived damaged. Did some repair work, I hooked it up to a water cooling system for the coils and 3-4 Adjustable AC 110/220V to 0-48V 10A 480W PSU's in parallel to affordably max the power (also available from Banggood). After I got everything set up it works great and heats fast enough that I can properly heat treat and normalize knife steal. Can't be the price for what you get!

    Mostrar original
  • 08/03/2019

    Board was received with 2 bent radiators with their fixation solder joints broken, one diode wasn't soldered on one side. Board was extremely dirty on the bottom and soldering job poor at best => I resoldered all and cleaned up before powering for the first time. Works great, tested with a 24V-50A power supply pushed at 28V

    Mostrar original
  • 09/02/2018

    Ok good for the purpose use

    Mostrar original
  • 26/06/2020

    excelente me llego el producto a mexico en el tiempo esperado muy buena calidad!!

    Mostrar original

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$14.99
    • US$109.99
    • US$13.99
    • US$7.99
    • US$69.99
    • US$8.99
    • US$119.99
    • US$44.99
    • US$5.99
    • US$7.99
    • US$10.99
    • US$8.99
    • US$9.99
    • US$36.99
    • US$56.70
    • US$33.99
    • US$7.59
    • US$12.99