Enviar a United Kingdom , USD
Revisión positiva superior para %s en Banggood, Compre el mejor %s con el precio más bajo en Banggood. Explore la reseña positiva más útil para %s antes de comprar., juguetes rc, deportes divertidos, moda, electrónica popular
ben 20/01/2019
1) calibrate for accuracy <1% 2) to upgrade from 0V-30V see picture input pin-3= 46kOhm (+and-) * avoid going negative! will not register anyway. 3) drain @9V supply is 11mA 4) increase readability with coloured film or paper. have fun!
9
Comentarios (2)
Enviar
  • bmwfreq64 I'dlike to use this LED voltage display to measure "millivolts"... for example "0.35mV". Is this possible, and if so, how to I modify the display to do this??
    I can be directly emailed at --> bmwfreq64@gmail.com.
    Thanks in advance.
    -Jay

    Reponder 02/03/2019
  • Dimand @bmwfreq64 Can'tbe done easily mate. Just finished pulling one of these things apart completely. It uses a microprocessor with an ADC input to read the voltage. It outputs a number based on a voltage up to 2V. Scale is 20.5/1V. It has a voltage divider to generate the correct calibration.

    You can remove the voltage divider and substitute your own to measure something with another scale but it needs at least half a volt to read up to a 10

    Reponder 06/06/2019
Encuesta de satisfacción

Descargar la APP y obtener extra cupón de 10%dto