Comentarios de Clientes

4.9 fuera de 5
Ver todos 879 comentarios
Escribe un Comentario
  • Todos los comentarios (879)
  • Imagen (138)
  • Video (5)
  • Todas Las Estrellas
    • Todas Las Estrellas(879)
    • 5 Estrellas(826)
    • 4 Estrellas(31)
    • 3 Estrellas(12)
    • 2 Estrellas(3)
    • 1 Estrellas(7)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • navjff
    FR
    24/07/2017

    Irx6 est un produit bien pratique pour faire voler ses mini drones (jjrc h36 E10 h8 ...) il fonctionne parfaitement avec la irangex irx-i6x mais attention ce n'est pas aussi aisé que sur les vidéo présenté sur youtube. En tout cas pour faire fonctionner sur ma télécommande mes différents modeles, allumer le drone, positionner les stick de la télécommande dans certaine position exemple pour e10 mettre le stick droit en haut a droite conserver la position, allumer la radio sans relacher, alimenter le boitier irx6 et la c'est ok appairage réussit. Je ne suis pas parvenu à trouver la bonne position pour mon clone syma x5 cependant le boitier fait bien son travail et c'est bien plus agréable d'utiliser une vrai radio plutot que celle livré avec le E10 J'ai trouvé sur le net un récapitulatif des positionsstick a adopter pour les différents modeles mas cela ne correspond pas sur la Irangex i6x je mets ce long texte en ligne en espérant que cela aidera d'autre personne

    Comentarios (1)
    Mostrar original
  • 05/09/2017

    There is some misleading information published that states that e011 is not compatible. That is not true. The setting for h101/H8 mini should be used as it is the same protocol as e011. Hope that helps someone.

    Comentarios
    Mostrar original
  • 27/07/2018

    After receiving it I went straight into modding my Fs-i6 for the module to not need additional batteries. What I did was to solder a cable to gnd and 3.3v pads I found on the board, and passed it through a little hole I made, that was it. Extremely easy mod and very practical. Btw, it is really worth buying if you have a fs-i6 family transmitter.

    Comentarios
    Mostrar original
  • 15/10/2017

    This is great cheap little module. Works fine with my FlySky i6s and I can control JJRC H36 with it. It comes with instructions sheet and instructions are clear: works with i6s and even more - you can solder two pads and then it will power up from i6s power source and you do not need external battery. This works for i6s only, while i6 and i6x need to use external battery. Binding is described in manual: turn off radio, plug in iRange module, turn on jjrc h36 (my example), move stick to described position and turn on radio while holding sticks in that position, wait few seconds and radio and quad will bind. Now you can fly it. Module remembers last binding and next time it's enough to: turn on quad, turn on radio with module in it (no need to position sticks to special position) and in 1-2 seconds they will bind automatically and you are ready to fly.

    Comentarios (1)
    Mostrar original
  • 01/05/2021

    Plazo de entrega estándar a Lituania desde el almacén de CZ. La calidad es medicare. El cable positivo se cayó después del primer intento de probarlo. Después de soldar el alambre, funciona bien. Muy importante es entender cómo cambiar los protocolos, ya que la instrucción no es muy clara. No podía entender lo que exactamente son los alerones, etc. en mi transmisor. Después de algunos intentos ahora puedo cambiar los protocolos sin ningún problema. No es muy agradable de usar con batería externa, pero mi FlySky FS-i6 no ofrece una salida de 5V, así que no tengo otra opción. Buen juguete para sus juguetes por el dinero! :)

    Comentarios
    Mostrar original
  • 05/04/2018

    This module brought the E011 and B-03 micros to another level. The extra pitch and roll allows for speeds that are not possible with the toy grade controllers. Such a great little addition to the FS I6X for less than 10 bucks. I bought another one as back up. 😄

    Comentarios (2)
    Mostrar original
  • 23/09/2019

    this is a really cool little device they can bind with tons of toy grade drones and even some helis setup is a little tricky at first and take some getting used to but after some practice it gets easier I will be installing a power switch at the jumper pads and wiring the power Pin internally on the TX

    Comentarios
    Mostrar original
  • 20/01/2019

    I can't believe it actually works! I powered up my e010 quad , powered up the quad and held the sticks in sequence and away the quad went 😁 all I have done is put a switch on it as per photo,s

    Comentarios
    Mostrar original
  • 30/10/2018

    Io ho ricevuto una versione che per la mia radio i6S suggerisce di fare un piccolo ponte evitando di usare la batteria, funziona con E010 Però non sono tanto bravo a saldare e ho rovinato un contatto del ponte, dopo aver cercato con il tester ho rimediato con il ponte che vede in foto. ATTENZIONE NON SONO SICURO CHE FUNZIONI SEMPRE.

    Comentarios
    Mostrar original
  • 30/12/2017

    Good product. Works fine with my FlySky FS-I6. Little bit hard to bind with my E010 but i done it. Only have to remember if you wanto bind with E010 pull both sticks in to low right position before powering on FlySky.

    Comentarios (1)
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$14.99
    • US$11.49
    • US$46.99
    • US$12.64
    • US$15.52
    • US$43.69
    • US$56.99
    • US$110.99
    • US$5.90
    • US$59.99
    • US$74.99
    • US$41.39
    • US$10.34
    • US$259.99
    • US$12.99
    • US$61.99
    • US$39.99
    • US$22.99