very good price and very quality very very hot :)

very good price and very quality very very hot :)

very good price and very quality very very hot :)

When I saw these I thought that they were a good idea. I had taken some ordinary heated grips off of one of my off road bikes because I found that the switch gear took up quite a bit of the grip length and when I had been working the bike hard I finished up with blisters on the outside of my thumbs from chafing on the bevel. These overcome that problem. The two problems I did face was sliding on the grips, Q20 just doesn't quite do it, I used a smear of Lithium grease, and routing the cable out of the twist grip. I ground a channel in the grip and finished it with a small zip tie. See pictures.

When I saw these I thought that they were a good idea. I had taken some ordinary heated grips off of one of my off road bikes because I found that the switch gear took up quite a bit of the grip length and when I had been working the bike hard I finished up with blisters on the outside of my thumbs from chafing on the bevel. These overcome that problem. The two problems I did face was sliding on the grips, Q20 just doesn't quite do it, I used a smear of Lithium grease, and routing the cable out of the twist grip. I ground a channel in the grip and finished it with a small zip tie. See pictures.

When I saw these I thought that they were a good idea. I had taken some ordinary heated grips off of one of my off road bikes because I found that the switch gear took up quite a bit of the grip length and when I had been working the bike hard I finished up with blisters on the outside of my thumbs from chafing on the bevel. These overcome that problem. The two problems I did face was sliding on the grips, Q20 just doesn't quite do it, I used a smear of Lithium grease, and routing the cable out of the twist grip. I ground a channel in the grip and finished it with a small zip tie. See pictures.

Without fitting get up to about 70 degrees. Hand grips get to about 35 degrees. Current draw comes up to 5 amps

Without fitting get up to about 70 degrees. Hand grips get to about 35 degrees. Current draw comes up to 5 amps

Without fitting get up to about 70 degrees. Hand grips get to about 35 degrees. Current draw comes up to 5 amps

СПАСИБО ПРОДАВЦУ ЗА КАЧЕСТВЕННЫЙ И НЕ ДОРОГОЙ ТОВАР ПРОВЕРИЛ ВСЕ РАБОТАЕТ

СПАСИБО ПРОДАВЦУ ЗА КАЧЕСТВЕННЫЙ И НЕ ДОРОГОЙ ТОВАР ПРОВЕРИЛ ВСЕ РАБОТАЕТ

СПАСИБО ПРОДАВЦУ ЗА КАЧЕСТВЕННЫЙ И НЕ ДОРОГОЙ ТОВАР ПРОВЕРИЛ ВСЕ РАБОТАЕТ

Very easy to install. Dissasembling the original hand grip first, installing the heated pads, and assembling again. Thats all.

Very easy to install. Dissasembling the original hand grip first, installing the heated pads, and assembling again. Thats all.

Very easy to install. Dissasembling the original hand grip first, installing the heated pads, and assembling again. Thats all.

I used this as an headed bed on my 3d printer....works great

I used this as an headed bed on my 3d printer....works great

I used this as an headed bed on my 3d printer....works great

Very easy to install. Dissasembling the original hand grip first, installing the heated pads, and assembling again. Thats all.

Very easy to install. Dissasembling the original hand grip first, installing the heated pads, and assembling again. Thats all.

Very easy to install. Dissasembling the original hand grip first, installing the heated pads, and assembling again. Thats all.

Simple to use. Easy to fit. Just the usual household tools will do the assembling of the pads. Perfect for a little warth when out on your bike..

Simple to use. Easy to fit. Just the usual household tools will do the assembling of the pads. Perfect for a little warth when out on your bike..

Simple to use. Easy to fit. Just the usual household tools will do the assembling of the pads. Perfect for a little warth when out on your bike..

looks good. just as described

looks good. just as described

looks good. just as described

good product

good product

good product