Comentarios de Clientes

4.93 fuera de 5
Ver todos 86 comentarios
Escribe un Comentario
  • Todos los comentarios (86)
  • Imagen (10)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(86)
    • 5 Estrellas(83)
    • 4 Estrellas(2)
    • 3 Estrellas(0)
    • 2 Estrellas(0)
    • 1 Estrellas(1)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 10/03/2014

    I'm using it with Arduino and works great. You have to install a specific library, there are some available but I'm using this one: https://github.com/renatoaloi/Enc28CoreLib it modifies the standard Ethernet lib and takes advantage from some chip's features. It's not plug-and-play like the W5100 shield but the extra work is worth the economy!

    Comentarios
    Mostrar original
  • 06/09/2016

    If it doesnt work right away it is a little tricky to troubleshoot. Here are some tips: http://techblog.se/2016/09/05/troubleshooting-the-enc28j60-ethernet-module-for-arduino-2/

    Comentarios
    Mostrar original
  • 14/05/2016

    This ethernet module works perfectly. I'm using the EtherCard library you can find on GitHub. Don't forget, VCC is 3v3!

    Comentarios
    Mostrar original
  • 26/07/2016

    Just tried it on a Nano with the UIPEthernet. The pins are : D13->SCK, D12 -> SO, D11 -> SI, D10 -> CS. Like another user, I had to plug VCC to the 5V pin on my Chinese Nano and not 3.3V for it to work. But I think I will not keep it connected to 5V because it could be harmful for the Network module. I will instead try a level shifter to step down the 5V voltage to 3.3V, or I'll use a separate voltage source for the module. Other than that, the module works great, I have been able to make a TCP server on my Arduino Nano and successfully send data to it !

    Comentarios
    Mostrar original
  • MilenZ
    BG
    11/09/2017

    I really do not like to give bad comments, but the module I received it seеm not working. I have tried it only on 3.3V. When it is connected to Arduino Uno - it gets overheated very fast. When it is connected to Arduino Nano - the temperature is not so high. With both Arduino boards (Uno & Nano) I did not get connection indication on the LAN port. I am trying to make it to work from the first day I got it - till now - NO SUCCESS. Any help is appreciated.

    Comentarios (1)
    Mostrar original
  • 09/07/2016

    Prodotto rispecchia le aspettative, ha funzionato fin dall'inizio. Testato con librerie EtherCard.h, UIPEthernet.h, ETER_28J60.h e EtherShield.h. I pin di collegamento su Arduino Uno/Mega sono: CS==D10/D53, SI==D11/D51, SO==D12/D50, SCK==D13/D52, RST===RESET, VCC==3V3, GND==GND. In genere i 3,3 volt di Arduino dovrebbero bastare anche se una alimentazione esterna sarebbe migliore. Testato sia con cavo Ethernet incrociato che diritto. Per il prezzo e la sua compattezza funziona alla grande. Consigliato.

    Comentarios
    Mostrar original
  • 01/07/2014

    Package arrived in about 2 weeks to Hungary. The device is the simplyest and of course the cheapest solution as an Ethernet interface for Arduino. Easy to use, the Arduino IDE has prewritten driver codes to handle it.

    Comentarios
    Mostrar original
  • 12/11/2013

    Недорогая платка интернет шильд для arduino , монтаж очень аккуратный, хорошо запакованная в мягкую пенку и антистатический пакетик. Купил для использования в робототехнике. В работе пока не проверял, но надеюсь все будет хорошо. Немного устал ждать, пришла через 28 дней. До этого получал быстрее, посылка шла до 3 недель. Рекомендую всем к покупке. Хороший магазин, хорошие цены, нормальное обслуживание.

    Comentarios
    Mostrar original
  • 27/01/2017

    Very good quality, works fine with Arduinos using basic libraries. It might be designed for 3.3V but it works fine using 5V too.

    Comentarios
    Mostrar original
  • 01/06/2018

    The product arrived a bit later than expected but it does its job. I would recommend using the UIPEthernet or the Ethercard library. The latter is easier to use in some cases.

    Comentarios
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$61.41
    • US$33.62
    • US$38.71
    • US$159.99
    • US$74.99
    • US$115.99
    • US$43.34
    • US$39.99
    • US$38.68
    • US$33.99
    • US$9.19
    • US$9.99
    • US$69.99
    • US$16.59
    • US$59.99
    • US$24.14
    • US$52.19
    • US$7.99