Llegó 3 meses tarde. La pantalla está agrietada y las líneas múltiples no funcionan. NO comprará de nuevo.

Arrived 3 months late. The screen is cracked, and multiple lines does not work. Will NOT buy again.

Llegó 3 meses tarde. La pantalla está agrietada y las líneas múltiples no funcionan. NO comprará de nuevo.

Supercompacto

super kompakt

Supercompacto

ottimo

ottimo

ottimo

Unfortunately the display is glued to the shield not in a parallel way, but under appr. 10 degree. Therfore only 90%.

Unfortunately the display is glued to the shield not in a parallel way, but under appr. 10 degree. Therfore only 90%.

Unfortunately the display is glued to the shield not in a parallel way, but under appr. 10 degree. Therfore only 90%.

The display is bigger - 1.3 Inch.

The display is bigger - 1.3 Inch.

The display is bigger - 1.3 Inch.

ok

ok

ok

Its a good board. Slim and sleek, perfect for projects that require a neat design.

Its a good board. Slim and sleek, perfect for projects that require a neat design.

Its a good board. Slim and sleek, perfect for projects that require a neat design.

WiFi with small Oled screen, interesting device, can't wait to try it out.

WiFi with small Oled screen, interesting device, can't wait to try it out.

WiFi with small Oled screen, interesting device, can't wait to try it out.

OK !!

OK !!

OK !!

these boards are working BUT !!! 8266 based boards labels are not correct for 8266F controllers...so you have to check 8266F pinout before programming :) (see attached photos) display connected to pin5 and pin4...so you should not connect anything to these gpio ports. thats all. ohhh...if your load high you have to put a small cooling onto chip...and it will work like a charm.

these boards are working BUT !!! 8266 based boards labels are not correct for 8266F controllers...so you have to check 8266F pinout before programming :) (see attached photos) display connected to pin5 and pin4...so you should not connect anything to these gpio ports. thats all. ohhh...if your load high you have to put a small cooling onto chip...and it will work like a charm.

these boards are working BUT !!! 8266 based boards labels are not correct for 8266F controllers...so you have to check 8266F pinout before programming :) (see attached photos) display connected to pin5 and pin4...so you should not connect anything to these gpio ports. thats all. ohhh...if your load high you have to put a small cooling onto chip...and it will work like a charm.