this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only