Comentarios de Clientes

4.65 fuera de 5
Ver todos 20 comentarios
Escribe un Comentario
  • Todos los comentarios (20)
  • Imagen (3)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(20)
    • 5 Estrellas(16)
    • 4 Estrellas(3)
    • 3 Estrellas(0)
    • 2 Estrellas(0)
    • 1 Estrellas(1)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 13/12/2019

    This is not a "normal" winch-controller. Important parts are missing in the description - and of course it does not come with a manual. Comes really nicely packed in a plastic box, does have a PH2.0 plug ("mCPx") for plugging in a winch or motor. I needed quite a lot of time to work out how this winch controller works. It does not work as a "normal" speedcontroller works. You will plug the winch controller directly to the receiver. But you cannot go forwards, backwards (and change speed), if you plug it to channel 2 (ESC channel) Every time, the winch controller gets a signal from the receiver/transmitter, it changes the direction of the motor/winch turn and runs slowly. Next "signal" is stop. Next signal is "run other direction". This has some advantages and some disadvantages, but I think, Banggood or RBR/C should tell us with a manual, how this winch controller works! It means: You can use this winch controller with a simple push button on your transmitter, as many transmitters do have (on the handle) and most people use for switching on/off lights. No 3-position switch is needed to control this winch controller, a push button does the job! This is a big advantage for people using a simple 3-channel transmitter with ch-3 controlled by a push button. They can control a winch now using this controller! But if you have a tx with 3-position switch, you cannot use this winch controller as you were used to with "normal ESCs" - pushing the switch to one direction - winch will go to this direction, center is stop, pushing to the other direction, winch will go to the other direction. This winch controller will work with such a switch, but it will change motor direction every time you push it, no matter, in which direction. So it is always - direction 1 - stop - direction 2 - stop - direction 1 - stop - direction 2 - stop... and so on. Nice: powerd by receiver. Check out BG 1533777 for a rx powered ESC which works perfectly as winch controller.

    Mostrar original
  • 21/11/2019

    Works awesomely! Its the perfect tool to get past the GT3C ch3 problem. Hit the button once, it feeds the line out, hit again, it stops, hit again, it pulls the line back, then stops when you hit it again. Cycles through it perfectly. Cannot be easier!

    Mostrar original
  • 15/02/2020

    Cosa fresca y cómoda.

    Mostrar original
  • 30/05/2022

    funciona perfecto con el controlador muy bueno.

    Mostrar original
  • 18/11/2021

    Todo bien como estar de vuelta

    Mostrar original
  • 16/01/2020

    Funciona con el botón de prensa del canal 3 remoto Flysky GT2B. Pulse 1 cabrestante salir, pulse 2 cabrestante, pulse 3 cabrestante entrar y pulse 4 cabrestante. Buen enchufe fácil y el controlador de cabrestante de juego. Instalado dentro de la caja suministrada, pero no resistente al agua, sólo a prueba de salpicaduras. Muy feliz.

    Mostrar original
  • 03/03/2020

    esta bien el parato

    Mostrar original
  • 04/05/2021

    De acuerdo

    Mostrar original
  • 28/12/2020

    Entrega rápida

    Mostrar original
  • 11/12/2020

    se ve bien aún no probado

    Mostrar original

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$7.99
    • US$10.38
    • US$13.99
    • US$24.24
    • US$10.04
    • US$40.19
    • US$14.69
    • US$8.07
    • US$4.99
    • US$11.54
    • US$12.99
    • US$29.99
    • US$6.89
    • US$13.99
    • US$37.49
    • US$11.99
    • US$9.99
    • US$13.86