Comentarios de Clientes

4.89 fuera de 5
Ver todos 168 comentarios
Escribe un Comentario
  • Todos los comentarios (168)
  • Imagen (19)
  • Video (6)
  • Todas Las Estrellas
    • Todas Las Estrellas(168)
    • 5 Estrellas(155)
    • 4 Estrellas(9)
    • 3 Estrellas(2)
    • 2 Estrellas(2)
    • 1 Estrellas(0)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Honduras)
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 01/02/2017

    Frame ist einfach genial, in Verbindung mit HGLRC V3.1. Platz ist jedoch richtig knapp. Verbaut 20A ESC und 2300kv Motoren liegt in der Luft wie ein Brett, danke Akku-Befestigung unten. Wenn jemand sich den Frame überlegt, kauft bitte gleich den Akku-Schutz dazu, dann habt ich nicht das Gefühl den Akku Kaputt zu machen beim Landen.

    Comentarios (1)
    Mostrar original
  • 03/04/2017

    Quality frame, comes in decent packaging. No burrs, so no need to burnish the components. Howewer the arm's thickness is 3,5 mm, not 4 as the description says. The manual is clear on how to assemble.

    Mostrar original
  • 23/11/2016

    All pieces were there plus extra. seems to be cut well and easy to build, will report back on how it crashes. But starting at 116 grams and only 4" props doesnt give me any excitement. May have to order the 5" arms

    Mostrar original
  • 19/09/2017

    Got the 250 version to use with 6" props. Modified it quite a bit. Normally the frame is wider than long and i made it a true X.

    Comentarios (2)
    Mostrar original
  • 07/08/2017

    I was impressed by my Martian III frame. It's got very tough 4mm carbon legs, and there's a decent amount of room to layout your electronics. I think it suits a stack arrangement best though. I put mine together in a 3 part blog post over at with a youtube video available at

    Mostrar original
  • 21/03/2017

    I really like this frame, the weight for 6 inch props is not as stated in the description. Don't remember exactly but the weight was around 130 grams I think. Pros: Good looking, durable, can be made to long-x with some 3d-prints Cons: A little heavy, camera sticks out a little bit too much in the front

    Mostrar original
  • 05/12/2016

    the geometry on this frame is fantastic....I been flying zmr250 clones...ther is no comparison...this one corners on another level. only criticism will be the rough machining on the arms. They required a ton of clean up with sandpaper. i also replaced all the screws with aluminum fasteners. very tight compartment for fc & components...but very buildable

    Mostrar original
  • 02/03/2018

    Es un frame muy resistente y de muy buena calidad. El bicho ha quedado con muy buena pinta. 100% recomendado Gracias Banggood

    Mostrar original
  • 20/03/2017

    Nice quality frame, the arms are thicker than 4mm. It looks durable.

    Mostrar original
  • 05/01/2017

    I really like the potential of this frame I am going to mod it from its original state and I think it is going to be awesome.. It has the normal sharp edges but that's to be expected out of the lesser expensive frames..

    Mostrar original

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$10.99
    • US$67.99
    • US$43.99
    • US$39.99
    • US$35.99
    • US$21.99
    • US$22.99
    • US$12.99
    • US$51.99
    • US$55.99
    • US$69.99
    • US$15.99
    • US$38.99
    • US$58.99
    • US$19.99
    • US$41.99
    • US$68.99
    • US$109.99