These are 6 ohm, 50 watt resistors in an attractive yellow anodized extruded aluminum housing. They come with approximately 6" / 15cm wires attached and properly connected to the terminals and insulated. It also includes four crimp on solderless connectors, all you need is a pair of pliers. At 12 volts they draw 24 watts, so they are conservatively rated. Be advised that in normal operation they do get HOT! I strongly recommend mounting them to a metal surface with 4-40 or M3 screws. These seem to be high quality and they look nice. And if your vehicle electric system needs the current used by the bulb to flash properly, you need these resistors. I recommend them!

These are 6 ohm, 50 watt resistors in an attractive yellow anodized extruded aluminum housing. They come with approximately 6" / 15cm wires attached and properly connected to the terminals and insulated. It also includes four crimp on solderless connectors, all you need is a pair of pliers. At 12 volts they draw 24 watts, so they are conservatively rated. Be advised that in normal operation they do get HOT! I strongly recommend mounting them to a metal surface with 4-40 or M3 screws. These seem to be high quality and they look nice. And if your vehicle electric system needs the current used by the bulb to flash properly, you need these resistors. I recommend them!

These are 6 ohm, 50 watt resistors in an attractive yellow anodized extruded aluminum housing. They come with approximately 6" / 15cm wires attached and properly connected to the terminals and insulated. It also includes four crimp on solderless connectors, all you need is a pair of pliers. At 12 volts they draw 24 watts, so they are conservatively rated. Be advised that in normal operation they do get HOT! I strongly recommend mounting them to a metal surface with 4-40 or M3 screws. These seem to be high quality and they look nice. And if your vehicle electric system needs the current used by the bulb to flash properly, you need these resistors. I recommend them!

They solved the problem of hyper flash on my new led lights, the resistance aluminum part looks well made but the plastic addapter are cheap

They solved the problem of hyper flash on my new led lights, the resistance aluminum part looks well made but the plastic addapter are cheap

They solved the problem of hyper flash on my new led lights, the resistance aluminum part looks well made but the plastic addapter are cheap

Exactamente como el descriptivo

exatamente como o descritivo

Exactamente como el descriptivo

tavsiye ederim kaliteli ürün

tavsiye ederim kaliteli ürün

tavsiye ederim kaliteli ürün

excelente produto.

excelente produto.

excelente produto.

Very good, works great for my LED turn signal!

Very good, works great for my LED turn signal!

Very good, works great for my LED turn signal!

Quite large, have good heat flow. Make sure you mount them on a metal surface for better heat absorbtion. Works fine with Led lights.

Quite large, have good heat flow. Make sure you mount them on a metal surface for better heat absorbtion. Works fine with Led lights.

Quite large, have good heat flow. Make sure you mount them on a metal surface for better heat absorbtion. Works fine with Led lights.

good for use as a dummy load for some atx computer power supply

good for use as a dummy load for some atx computer power supply

good for use as a dummy load for some atx computer power supply

funziona benissimo

funziona benissimo

funziona benissimo

Good price. No issues since installed 30+ days

Good price. No issues since installed 30+ days

Good price. No issues since installed 30+ days