Banggood

This is a nice litle valve. Compact and its 'on' state current draw is reasonable. Its supposed to be IP65 rated, but I not checked, as that would require taking it appart or testing it to distruction. One point to consider, this valve has quite a small orriface diameter. Which is fine for applications that require line pressure, but if you need high volume flow this valve has limitations. All in all a nice valve. Will be fine for most applications, but if you need high volume flow this will be

ok

Very nice solenoid to replace the co2 solenoid on my mig welder

This solenoid valve works nicely. Not excellent quality bit enough for light use.

used on my 51 truck for the electronic air ride controls

ice and small for my airbag on my 51 chevy truck

Works perfectly running on Arduino projects, using a 5V relay to trigger the open and close. Despite the details, i have been able to regularly cycle the valve at 1ms increments. For testing purposes i triggered 1ms pulses for 10minutes and the solenoid did not get warm, or miss any triggers. I was only running 40psi, but upto 60psi on peaks, with no leaking or blow-by. Great product for the price.

Megérkezet és minden rendben jól működik.Sajna az utólsó rendelésem 16408022573271.....nem érkezett meg és semmilyen választ sem kapok.Azt hiszem többet nem fogok önöktől rendelni és nem is ajánlom senkinek.

A nice neat solenoid for MIG welder replacement or upgrade use. Arrived quickly and a good price.

Works like a charm!! :-)