Comentarios de Clientes

4.94 fuera de 5
Ver todos 256 comentarios
Escribe un Comentario
  • Todos los comentarios (256)
  • Imagen (28)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(256)
    • 5 Estrellas(244)
    • 4 Estrellas(10)
    • 3 Estrellas(1)
    • 2 Estrellas(0)
    • 1 Estrellas(1)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 25/07/2020

    Producto como descripción. Probado bien trabajando como se esperaba. Tuve un pequeño shock emocional cuando noté claramente la deformación de la cubierta metálica del módulo debido a un objeto afilado en la parte superior de la misma. Afortunadamente, la pantalla del módulo no estaba rota. Últimamente muchos pedidos de este vendedor son muy pobres embalados en términos de protección durante el tránsito. Sólo la bolsa antiestática dentro de un sobre de papel y dentro de un sobre de plástico más grande. No hay papel de burbuja para proteger los elementos frágiles en el interior, por ejemplo. lcd y éstos pueden ser fácilmente dañados por el manejo rudo durante el transporte. A corto plazo este procedimiento puede ahorrar dinero para el vendedor, pero es una trampa porque a largo plazo los clientes empezarán a evitar comprar a este vendedor debido a la alta tasa de productos muertos a la llegada. Tablero de buena calidad. Recomiendo.

    Comentarios
    Mostrar original
  • 12/05/2018

    it has a revision 1 chip it only has space for unprotected 18650 batteries

    Comentarios
    Mostrar original
  • 16/01/2018

    After a long search I finally had all the information to create my own sketches. So far, everything works. The OLED display is glued to the board. The adhesive dissolves after a short time. Doesn't look good, but it's harmless. Also a warning to everyone: The USB plug is soldered without through-plating and detaches relatively easily from the board. I am not the first to whom this happens. With my first board it happened already with the third plugging in. It's a case for e-waste. The connector goes very tight and is barely able to cope with the forces. This is now my second board and I will take appropriate precautions to prevent this from happening again.

    Comentarios (1)
    Mostrar original
  • 26/10/2019

    The unit is tidy, but perhaps a little larger than I was expecting, the measurements on pictures are accurate though. I took note of previous comments and have applied a couple of drops of superglue to the USB connector to stop it snapping off. I have used a 4x18650 battery pack which should allow this to run for ages, so far I have only run the demo The OLED display looks white, but shows up blue in the photograph. Be aware that the standard 0,1" DuPont style headers supplied with the unit will NOT connect to a breadboard if soldered to the underside because of the depth of the battery holder - you would to use female to male extenders - you could always solder them to the top, but you wouldn't see the OLED I intend to use this without the headers, so it doesn't make any difference to me

    Comentarios
    Mostrar original
  • 11/09/2019

    board is working and looking great

    Comentarios
    Mostrar original
  • 09/11/2019

    Good product. Recommended.

    Comentarios
    Mostrar original
  • 10/12/2021

    Tengo mi módulo para el reloj led giratorio. Pantalla de POV. Este módulo incluye WIFI por lo que actualiza el reloj de Internet y nunca necesito hacer ajustes entre el verano y el invierno. Y no necesito corregir la hora. Es lugar para la batería en el módulo.

    Comentarios
    Mostrar original
  • 07/04/2020

    no un producto lilygo oficial sino basado en el esquema oficial (no tiene logo ttgo). Funciona como un encanto tho. Este es el viejo modelo. El nuevo modelo se llama lilygo ttgo t18. software y ejemplos están en GitHub y sobre una simple investigación de Google. (utilice las siguientes palabras clave: ttgo oled y soporte de batería). muy recomendable ya que se envía desde el Reino Unido. Tenga en cuenta que el peso de la batería la hace sujeta a caerse y frenar el conector usb si se conecta un cable

    Comentarios
    Mostrar original
  • 05/10/2019

    la confezione non ha molte protezioni, ma non avendo i pin montati l'articolo non presenta danni. arriva con preinstallato uno scatck per il test del display. ho testato anche la batteria e funziona.

    Comentarios
    Mostrar original
  • 14/02/2019

    Very good ESP32 board. The built in OLED display is very easy to read. Bright enought. The Battery charger working fine. Recommended to buy together with a good 18650 battery.

    Comentarios
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$9.99
    • US$6.99
    • US$6.23
    • US$21.99
    • US$13.86
    • US$7.99
    • US$14.99
    • US$10.99
    • US$53.12
    • US$7.99
    • US$61.41
    • US$33.62
    • US$39.99
    • US$10.48
    • US$43.34
    • US$25.29
    • US$9.19
    • US$19.99