Todos los mensajes

Q: Does it do full acro? Can you use tri blade props? thanks

Preguntado por BG121712837 sobre 2021-10-03 04:27:51

DonKracho Yes it can do acro mode depending on you betaflight settings. It is nuch much more agile compared to a Tini Hawk with 1S

2022-05-01 07:57:48 Servicial (0)
Enviar
respuestas (5)

DonKracho The UZ80 can fly very stable and slow depending on yout transmitter and betaflight settings. But I do not recommend to use it in free nature! The UZ 80 has no alarm beeper. If you crash you may not find it even in high gras.

2022-05-01 07:53:11 Servicial (1)
Enviar
respuestas (7)

Q: Is 3.7 lipo or 3.8 LiHV?

Preguntado por maxycma sobre 2022-04-30 10:33:40

DonKracho The specifications of contoller and ESC to allow 1S LiHV (4.35V). I use it with LiHV too. The voltage is slightly higer only and does not break the electronics.

2022-05-01 07:44:05 Servicial (0)
Enviar
respuestas (1)

Q: Does it support Alexa?

Preguntado por PanosGR sobre 2022-03-09 10:52:07

DonKracho No

2022-03-12 12:06:54 Servicial (0)
Enviar
respuestas (2)

Q: Please explain Tilt vertical: 120°. What is maximum up/down?

Preguntado por BG175411619 sobre 2020-09-15 10:16:40

DonKracho Unfortunately it can not look up. From horizontal it goes to straight down 90° and further 30° up again. In summary 120°

2021-06-09 05:39:19 Servicial (0)
Enviar
respuestas (1)

Q: what is the rtsp url syntax to stream image on VLC?

Preguntado por BG131881332 sobre 2020-12-26 07:02:57

DonKracho By default use rtsp: slash slash [ip of your cam]:554 slash 11 for mainstream or 12 for substream. rtsp can be configured to require credentials.

2021-06-09 05:32:47 Servicial (1)
Enviar
respuestas (2)

Q: what is the recording format, h264 or h265?

Preguntado por BG316133819 sobre 2021-03-16 04:22:52

DonKracho It can be configured for booth H.264 (baseline, mainprofile, highprofile) or H.265 (mainprofile)

2021-06-09 05:15:19 Servicial (1)
Enviar
respuestas (3)

Q: Can the camera firmware be updated if necessary?

Preguntado por tholl sobre 2020-10-28 03:29:04

DonKracho As long as there are no faults, I would not recommend to update the firmware. There is firmware on www.ipcam.xin and can be updatated via the webserver integrated in the cam (http: ip of your cam). The firmware update applies a factory reset. Be aware that you will loose the WiFi connection.

2021-06-09 05:00:12 Servicial (2)
Enviar
respuestas (5)

Q: Does this camera support digital WDR?

Preguntado por BG431932232 sobre 2020-09-29 05:43:36

DonKracho yes

2021-06-08 04:25:41 Servicial (0)
Enviar
respuestas (1)

Q: this controlled with the eWelink app ?

Preguntado por JinXed sobre 2021-01-10 08:41:15

DonKracho No, The sample sketch preinstalled just switches the Relays in a sequence. The easiest way will be to flash tasmota.

2021-02-05 02:54:12 Servicial (0)
Enviar
respuestas (2)
DonKracho 31/03/2020
0
Recomendaciones
Comentarios (0)

DonKracho Watchout for the CAM connection. It provides 10V. The Caddx EOS will shut down at 10V (gray image). Remove the red wire from the connector and put it on a 5V rail and everythng is fine. looks like Eachine has not tested this before delivery:(

jcreyes78 26/03/2019
6
Comentarios (2)