Mejores ofertas para Switching Power Supply - Banggood Spain Online Shopping

jeever

mis contenidos: Todos los mensajes; Comentarios; Comentarios; respuestas; Preguntas

Todos los mensajes

jeever 03/06/2023

Nothing but praise about the device itself. This multimeter is a very versatile device that offers more features and functions than many of its much more expensive counterparts. The accuracy of most measurements is excellent. Only when measuring electrolytics does this multimeter go wrong, but it shares this ailment with almost all multimeters that work according to the measurement system. The hardware, in our opinion, can only be criticised in detail. For instance, we find it rather irritating that the built-in beeper always beeps loudly when automatically switching from one measuring range to another. An option to switch off the beeper would be welcome! An additional range up to 10,000 μF for measuring large supply electrodes would obviously be a very practical addition. The input protection with a MOV switched directly between the 'COM' and the 'V/Ω/Hz' does not deserve any beauty prize in theory, but in daily hobby practice you will have very little trouble with it. After all, when do you measure voltages over 250 V? Never! One criticism of the firmware is that setting up and operating some functions is not very intuitive. Without reading the manual you will get stuck! For functions not often used, such as setting upper and lower thresholds, you will have to search the manual again and again for how it works. Our opinion of the software can be given with just one word: worthless!

DM8145 4 7/8 Banco Multímetro 1000V 20A 80000 Cuenta Digital Multímetro probador Auto Rango Multimetro Voltímetro digital Ohm

US$157.99 US$209.99

0

Comentarios (0)

jeever 13/04/2023

We have a very mixed feeling about this device. It looks very nice, is affordable and, because of these features, is undoubtedly a nice little gadget that a lot of hobbyists will fall for. But...a technical evaluation does not take into account such external features, but must answer the question of whether the DSO-TC3 is a good usable measuring device. As for the function generator and oscilloscope functions, we are quite positive. Both functions work, within the limitations of such a simple and inexpensive device, excellently. As for the measurement functions, we have to be less positive. Both small capacitors and inductances are measured with large errors. The measured ESR values of electrolytics and series resistances of coils are also a joke. About measuring a DC voltage with a resolution of up to 1 mV with a meter with an internal resistance of 160 kΩ, we are clearly: nonsense!

FNIRSI DSO-TC3 Digital Osciloscopio Transistor Tester función generador de señal 3 en 1 multifunción probador de componentes electrónicos

US$65.99 US$69.99

9

Comentarios (0)

jeever 23/09/2021

The internal looks neat and tidy. On the left you see the mains filter and next to it the rectifier of the mains voltage with two large smoothing capacitors. The electronics are still very traditionally built with axial components on a single-sided PCB with wire bridges. You will search without success for SMD components. Notice that isolation slots are milled into the PCB in many places. The heavier components are fixed with sealant. All in all, this power supply makes a reliable impression. We could not resist performing a few tests on this power supply. Our specimen produced a voltage of 65.263 V without load. Loaded with a current of 5.5 A, the voltage drops to 65.134 V. The voltage drop is thus 129 mV. This corresponds to an output stability of 0.20 %. The figure below compares the hum and noise at no-load (left) and full-load (right). The peak-to-peak value of the noise and ripple at full load is therefore 250 mV.

RIDEN® RD6006/RD6006-W LED Switching Power Supply S-400W-48V/DC12V/24V/36V/60V 8.3A-33.3A Support Monitoring Transformer Lighting

US$40.24 US$51.83

8

Comentarios (1)

jeever 14/09/2022

The electronics of the GY20451 The version of the GY20451 supplied to us contains only ten electronic parts. Thus, the scheme is quickly reconstructed and worked out in the illustration below. The 12 V supply voltage is converted into 5 Vdc in U1, an AMS1117, to power the microcontroller. Both the input and output of this stabilizer are decoupled with capacitors C5, C1 and C2. LED1 is connected to the 5 V output via the series resistor R1. An STC15W104 is used as microcontroller. It has a built-in clock generator, so no external parts are necessary in this scheme. Two square waves with a frequency of 40 kHz appear at the outputs P3.2 and P3.3. These two signals drive the two inputs of U3, a TCA4427. That is a double 'High-speed Power MOSFET Driver'. The outputs are connected by means of two MOSFETs either to ground or to the 12 V power supply. These two outputs directly feed the two piezoceramic resonators TX1 and TX2.

Ultrasonic Suspension Electronic DIY Production Parts Wave Soldering Training DIY Kit Science Experiment

US$16.09 US$13.99

8

Comentarios (5)

jeever 17/04/2023

The most important question: does steam come out? Yes indeed, and not by much! We stuck a transducer to the bottom of a small dish (with a gap, of course). Then we filled the dish with a little water until the transducer was just submerged. And then put the voltage on it! To make the result very clear, we filmed it in a fully darkened room with special lighting, so you can clearly see the water mist produced. Quite impressive, isn't it? Such a heap of mist from such a small compoment!

WHTCA01 Type-C Mini humidificador USB DIY Kit niebla Placa de circuito de controlador de fabricante Nebulizador de película de atomización Atomizador

0

Comentarios (0)

jeever 05/04/2023

We would call the S1 a 'fashion conscious' multimeter. 'Fashion conscious' because the design goes along with the trend of hand-held devices resembling a smartphone. However, is the S1 worth its price? For thesame price, you can buy a lot of multimeters that measure currents and have a 'REL' function and/or a 'MIN/MAX' function. Moreover, there are meters that have a more sensitive range than 9.999 V. The only extra useful thing about the S1 is its rechargeable battery, as most multimeters work with non-rechargeable batteries that sometimes run out of power at the most undesirable times. A wall outlet and a USB charger can always be found near the measurements. In terms of measurement accuracy, the S1 meets most of its specifications. You can trust this device to measure voltages, resistances and frequencies almost flawlessly. But that too is a feature that many identically priced meters have. So FNIRSI's S1 will be purchased mainly for its fashionable appearance. Indeed, we can imagine that a lot of technicians will fall in love with this nice-to-handle, smartphone-like and easy-to-operate little meter and would love to get it as their second (or third) multimeter for that affordable price.

FNIRSI-S1 9999 Counts Digital Multímetro AC DC Voltaje Resistencia Capacitancia Diodo NCV Hertz Live Alambre Probador con termopar

US$31.99 US$35.99

0

Comentarios (0)

jeever 28/02/2023

We have worked around with about five function generators in this price range over the past three years. So we can make some comparisons. The ET3320C comes out of this comparison as the best and most versatile function generator without any reservations. With this device, 'East Tester' has set a new standard on the market! We can unreservedly recommend this function generator to any serious hobbyist who wants to buy a good and versatile function generator for not too much money. The only two points of criticism, but immediately very serious ones, are the lack of a fuse in the primary supply circuit and the fact that the ground of the three BNC connectors is connected to the mains plug ground only via the PCB.

East Tester Función de canal dual Generador de forma de onda arbitraria 20Mhz 40Mhz 60Mhz Medidor de frecuencia Fuente de señal ET3320C ET3340C ET3360C

US$109.99 US$139.99

0

Comentarios (1)

jeever 11/11/2019

It will be clear that this power supply is an example of superior Chinese technology. The measured performance can be called brilliant. The way in which this device is constructed is also taken care of in detail. Another question is whether this power supply is useful in use. My opinion: no! The dimensions are in fact too small to be applied conveniently in daily laboratory practice. Just give me a traditional power supply with potentiometers to set the voltage and current. The last question to be answered is how the price/performance ratio of the MDP-P905 can be assessed. My answer is that this power supply is too expensive for what the device performs. In terms of specifications similar power supplies are for sale for prices around € 60.00. The MDP-P905 is in my opinion a gadget for technicians who do not mind spending some extra money on a product that clearly distinguishes itself from the competition.

MDP-XP 30V / 5A 90W 2.4G Conexión inalámbrica Sistema de alimentación programable digital con pantalla TFT de 2.8 pulgadas Monitor Control de correspondencia automático 6 submódulos

US$248.31 US$257.99

16

Comentarios (3)

jeever 07/10/2022

A major improvement is that the column on which the microscope is mounted can tilt backwards, so that much more space is available for soldering a PCB on the base. Tilting also helps against reflections in the image and it is much easier to decipher the lasered texts on chips at a certain angle. The LED lighting works great when it comes to getting a sharp and clear image of a detail of a part or a solder weld on a PCB. However, the color fidelity is worthless with this cold white lighting. If you want to take a nice picture of a small PCB, it is best to switch off the LEDs and use the natural ambient light. The microscope then provides much nicer and more color-true images. It often happens that we sell a tested product for half the price to one of our readers. That won't happen with this G1200(D) microscope! We keep it as a very worthy replacement for our old G600. After all, we are very satisfied with the quality and sturdiness of the G1200(D). The only downside that we can think of is the mechanical instability already described when you press one of the buttons, which causes the image to vibrate. A second later, however, the device gives a stable image again, you have very little trouble with it in practice.

G1200D Digital Microscope 12MP 7 Inch Large Color Screen Large Base LCD Display 1-1200X Continuous with Light

US$67.99 US$99.99

2

Comentarios (0)

jeever 29/06/2021

The radio is powered from a 5 V USB mains power supply which is not supplied. Included is a power cable from USB-A to standard 5.5 x 2.1 mm power plug. Dominant on the front panel is the display. It shows '==STEREO RADIO==', but that does not make sense, as the radio has only one built-in speaker and is therefore mono. Above the display is a row of ten LEDs. These form a double LED VU-meter, controlled by two KA2284 chips. Below the display, there are two large red push button switches and four small black push buttons. The left red switch turns the radio on or off. Irritating is that the last settings are not stored in the memory. The radio will always start up at the lowest frequency in the FM band that gives an acceptable signal and with the volume set to 8.

Geekcreit® DIY Radio Piezas del kit electrónico 51 Máquina de sonido digital FM de un solo chip

US$22.99 US$23.99

7

Comentarios (2)

jeever 31/10/2018

This five-meter-long light-strip is composed of segments that are exactly 50 mm long and each contain three RGB-LEDs plus three series resistors to feed the whole from 12 Vdc. There is a cut-line between two segments, you can cut the ribbon there so that you can adjust the dimensions of the light tube. The strip is provided on the back with a good adhesive layer VHB Adhesive from 3M with protective sheet. After removal of the protective sheet, you can easily attach the strip to any smooth surface. The LEDs use the following currents: red LEDs 864 mA, blue LEDs 673 mA, green LEDs 723 mA. The internal resistance of the five meters for the red voltage line is 4.3 ohms, the blue voltage line 3.8 ohms and the green voltage line 3.8 ohms.

5M RGB No-Impermeable 300 LED SMD 5050 LED Tira de la Luz DC 12V

US$15.00 US$15.99

37

Comentarios (1)

jeever 23/09/2021

It will be clear from the test results that there are really no points of criticism about this module. If you need to accurately measure a DC voltage somewhere, you can use this inexpensive module without any hesitation. Read my test/review: https://chinese-electronics-products-tested.blogspot.com/p/33000-vdc-digital-panel-meter-tested.html

DC 4 V-30 V 0,36 Inch 5 dígitos Mini LED Pantalla voltímetro Digital Panel de prueba de voltaje medidor de alta precisión 3 cables

US$13.85 US$14.99

4

Comentarios (0)

jeever 13/04/2018

Most wire-wound high-power resistors are quite inaccurate. We tested these resistances by sending a constant current of 1.00 A and measuring the DC voltage across the resistors, see the diagram below. The results are excellent, see the attached table. Conclusion: the most accurate power resistors ever bought!

100W Watt Power Metal Shell Caso Resistencia bobinada

US$9.23 US$9.99

4

Comentarios (0)

jeever 23/08/2018

We have tested three of these PCB's with a voltage of 30 Vdc and a load of 10 ohms. Unfortunately, we are unable to test this PWM print under the specified full load of 90 W at 35 V power supply. But if we extrapolate the results of our test at 30 V and 75 W, we are convinced that this print will function well under full load. If we take the incident with one bursting thermal fuse as an accidental defect, due to a part with a manufacturing fault, we can decide that this extremely cheap power regulator does what it is supposed to do. If you have to regulate the power of DC voltages up to 30 V and 3 A, this PCB is recommended.

3Pcs 5V-30V DC PWM Regulador de velocidad Mini eléctrico motor Interruptor de control LED Dimmer Module

US$9.23 US$9.99

1

Comentarios (1)

jeever 09/02/2018

Stabiliteit van de uitgangsspanning Deze voeding gedraagt zich perfect. Wij hebben als eerste test de uitgangsspanning ingesteld op 5,00 V en de voeding stapsgewijs belast tot 2,000 A. De uitgangsspanning daalde van 5,00 V tot 4,97 V. De metingen werden herhaald met een uitgangsspanning van 12,00 V bij nullast. Bij 2,000 A daalde de uitgangsspanning naar 11,98 V. Tot slot gemeten bij een uitgangsspanning van 30,00 V. Bij 2,000 A leverde de voeding 29,99 V. Nauwkeurigheid van het display Ook wat dat betreft levert de DPS3003 optimale prestaties. De metingen van spanning en stroom op het display werden vergeleken met deze op een goede universeelmeter. De grootste afwijkingen die wij vonden bedroegen slechts 10 mV en 3 mA.

RIDEN® DPS3003 32V 3A Buck Fuente de alimentación de voltaje constante de CC ajustable Amperímetro de voltímetro integrado con color Pantalla

US$43.88 US$45.99

3

Comentarios (0)

jeever 02/02/2018

De FY3200S van het Chinese Feeltech levert signalen tot 24 MHz op twee volledig onafhankelijk instelbare uitgangen. Behalve de standaard signalen levert deze generator onder andere sweeps, elektrocardiogram pulsen, witte ruis, AM en FM. De ingebouwde frequentie/puls-counter is bruikbaar tot 100 MHz. Met zijn prijs van ongeveer € 50,00 is deze functiegenerator een uitstekende keuze voor het hobby-lab.

FY3224S (FY3200S-24M) 24MHz Forma de onda arbitraria de doble canal DDS Generador de señal de función Contador de barrido de onda cuadrada sinusoidal

US$75.99 US$91.99

3

Comentarios (1)

Stark Long Arc y Bluetooth Música de modo dual Música Bobina de Tesla Palm Flash Bluetooth Flash longitud 10CM Juguetes científicos

US$80.49 US$99.99

Q: is it prebuilt?

Preguntado por BG373638323 sobre 2022-05-23 07:00:30

jeever Yes, it is delivered completely built.

2022-05-23 07:32:46 Servicial

Enviar

respuestas (1)

jeever 10/05/2018

We are extremely satisfied with this microscope and we can recommend it if you are looking for such a tool. It is an ideal tool to check the soldering of SMD-components on your PCBs and to get the codes on such parts clearly visible. The only thing we miss is the possibility to offer the images directly to a PC via the USB port. If you want to do something with the photos, for example publishing on your blog, you have to remove the card from the microscope and connect it to the USB port of your PC via a card reader.

G600 Digital 1-600X 3.6MP 4.3 pulgadas HD LCD Pantalla Microscopio Lupa continua Versión de actualización

US$49.99 US$67.99

8

Comentarios (3)

jeever 02/02/2018

Als u handig shopt op Chinese sites kunt u voor vijftien euro alle onderdelen verzamelen voor het samenstellen van een regelbare gestabiliseerde voeding met een uitgangsspanning van 0 V tot 16,5 V en een uitgangsstroom van 2 A, met bovendien digitale metertjes voor spanning en stroom. Is dit een bruikbaar alternatief voor de dure laboratorium voedingen?

DC-DC Módulo de Fuente de Alimentación Ajustable de Reducir el Voltaje Con Pantalla de LCD Con Cubierta

US$13.79 US$14.99

4

Comentarios (0)

Stark Long Arc y Bluetooth Música de modo dual Música Bobina de Tesla Palm Flash Bluetooth Flash longitud 10CM Juguetes científicos

US$80.49 US$99.99

Q: Can it be plugged into a normal USA standard (i think 110 ) outlet and function completely ?

Preguntado por BG454017491 sobre 2022-04-25 10:30:24

jeever The device I ordered came with a 230 V adapter. But maybe orders from the USA automatically include an American adapter.

2022-04-25 10:55:27 Servicial

Enviar

respuestas (1)