Todos los mensajes

Franklydude 2020-09-21 09:00:59
0
Recomendaciones
Comentarios (0)

Los mejores críticos que te gusten:

Q: Is there a video of this model in flight?

Preguntado por twointhebush0111 sobre 2020-08-14 10:44:04

Franklydude most likely not! It would not have a hope in hell of flying and that tiny direct drive motor would not have enough thrust to achieve lift off from water....so I'd be very interested in a maiden flight too!

2020-08-19 02:19:41 Servicial (0)
Enviar
respuestas (1)

Franklydude You should look at the receiver board inside to see if the elevator servo has broken or just disconnected from the control surface..... anyway, if you need a new one, you'll be best to get a whole new Rx board which is available on Banggood, https://uk.banggood.com/XK-A800-4CH-780mm-3D6G-System-Glider-RC-Airplane-Spare-Part-Receiver-p-1380443.html?rmmds=search&cur_warehouse=CN

2020-06-01 02:57:58 Servicial (0)
Enviar
respuestas (2)

Q: when thats available ??

Preguntado por Adhie129 sobre 2019-09-04 08:30:07

Franklydude Bangggood seem to have completely lost the plot and don't bother to audit their online catalogue...

2020-05-06 03:44:04 Servicial (2)
Enviar
respuestas (1)

xoverstudio because it is miniaturized. the dimensions are noticeably different.Size: 18 × 10 × 2.6mm against the Size: 20mm*11mm*5mm (L *W*H) the weight is 0.8 grams, against the 6.2 grams of the other. its weight and dimensions make it perfect for use on drones, planes etc.

2020-04-22 04:53:25 Servicial (3)
Enviar
respuestas (2)

Q: what is real capacity?

Preguntado por Joker sobre 2020-04-04 01:55:32

Franklydude Who the heck knows, it's clearly way too small to be 20,000mAH And despite me reporting this to Banggood, they refuse to remove the product or correct the specifications! Rubbish!

2020-04-12 06:06:30 Servicial (3)
Enviar
respuestas (7)

Q: Where can I get replacement propeller for this little airplane?

Preguntado por Franklydude sobre 2019-08-29 04:30:30

Cre8ionz Also searching for a replacement propeller..

2019-12-06 08:25:39 Servicial (0)
Enviar
respuestas (1)

Q: which geared motor do I need, is it A B or C from you list Thank you

Preguntado por robertrollins sobre 2019-10-27 09:55:30

Franklydude C motor is 7mm x 16mm, while B is 7mm by 20mm and A is a 8 x 20mm motor I would suggest the C or B are suitable

2019-11-04 05:14:47 Servicial (1)
Enviar
respuestas (1)

Franklydude Thereceiver shown on the photos of the assembled unit does have a 2A Brushed ESC built into the receiver board. The receiver is listed on Banggood web site:- 2_4G-4CH-Micro-Low-Voltage-DSM2-DSMX-Compatible-Receiver-Built-in-Brushed-ESC

Gumbo 2019-05-11 16:05:54
8
Comentarios (5)

Franklydude to Van Gogh,, if it is "easy" as you say, please could you post where the electrolytics go, and what the switches do and how to calibrate it? PLEASE?

2019-04-20 01:23:53 Servicial (0)
Enviar
respuestas (3)

Franklydude Could some one please post the capacitor values... please...

2019-04-16 06:58:04 Servicial (0)
Enviar
respuestas (3)

Franklydude I think you can find 1.7gm servos with the tiny jst connectors which are JST-SH with 1mm pitch, But they are also available with 1.25mm pitch I guess which is "molex picoblade" looks almost the same but will not fit! HK 5320's come with the 1.25mm pitch plugs, But I think the HK 5320S may come with the 1mm JST, but it does not specifically say that on the HobbyKing web site... This one on BG web site says 1.25mm https://www.banggood.com/1_7g-Low-Voltage-Micro-Digital-Servo-Mini-JST-Connector-for-RC-Model-p-1157620.html?rmmds=search&cur_warehouse=CN This one on BG website says 1mm JST https://www.banggood.com/TY-Model-1_7g-Servo-With-JST-1_0mm-Plug-Compatible-Spektrum-6400-Series-Receiver-For-RC-Airplane-p-1320271.html?rmmds=search&cur_warehouse=CN The HK5320S are cheaper...

2019-03-21 09:09:17 Servicial (0)
Enviar
respuestas (2)

Q: What's the material it's made from ?

Preguntado por fchansa sobre 2019-02-06 09:03:41

Franklydude Mine is made from 2.15mm thick depron... not 3mm

2019-03-13 04:47:35 Servicial (2)
Enviar
respuestas (4)