Todos los mensajes

Coops The test time is based on Current (Amp) and Capacity (mAh). If you started the test with battery fully charged 4,2V and you tested at 1A (1000mA) then 10 minutes is 0.6 Hours. So the battery capacity is 600mAh... about what the real rating of any battery with "fire" in its name. However keep in mind you need to start with full battery voltage and set a suitable cutoff voltage - the auto default is 3.0v which is higher than most manufacturers data sheets (usually 2.75v) and this you will get slightly lower capacity from ZB206 "auto" test results.

2020-03-19 04:13:40 Servicial (0)
Enviar
respuestas (2)