El envío llegó rápido. 6 días a Croacia. Cada producto en una bolsa separada. Intentado y no puede dar 0.8A de 3.7 a 12v en 4100mah lipo batt. Así que nada bueno hasta ahora. Lo intentaré en 18650, pero...

Hi. Shipment came fast. 6 days to Croatia. Each product in separate bag. Tried and it can not give 0.8A from 3.7 to 12v on 4100mah lipo batt. So no good so far. Will try on 18650 but...

El envío llegó rápido. 6 días a Croacia. Cada producto en una bolsa separada. Intentado y no puede dar 0.8A de 3.7 a 12v en 4100mah lipo batt. Así que nada bueno hasta ahora. Lo intentaré en 18650, pero...

It is a mighty little module, a great addition and building "brick" for your DIY projects. It starts to give output from about 2.8V and cuts out at 2.7V. Be careful though, when you set your output to a value with the input being 2.8V, the change in the input will result in a great change to the output, but this is not specified/guaranteed mode anyways... It may be necessary to keep the output under certain load to achieve stabilization, I will give it some test later on...

It is a mighty little module, a great addition and building "brick" for your DIY projects. It starts to give output from about 2.8V and cuts out at 2.7V. Be careful though, when you set your output to a value with the input being 2.8V, the change in the input will result in a great change to the output, but this is not specified/guaranteed mode anyways... It may be necessary to keep the output under certain load to achieve stabilization, I will give it some test later on...

It is a mighty little module, a great addition and building "brick" for your DIY projects. It starts to give output from about 2.8V and cuts out at 2.7V. Be careful though, when you set your output to a value with the input being 2.8V, the change in the input will result in a great change to the output, but this is not specified/guaranteed mode anyways... It may be necessary to keep the output under certain load to achieve stabilization, I will give it some test later on...