Comentarios de Clientes

4.88 fuera de 5
Ver todos 92 comentarios
Escribe un Comentario
  • Todos los comentarios (92)
  • Imagen (7)
  • Video (1)
  • Todas Las Estrellas
    • Todas Las Estrellas(92)
    • 5 Estrellas(85)
    • 4 Estrellas(5)
    • 3 Estrellas(1)
    • 2 Estrellas(0)
    • 1 Estrellas(1)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Honduras)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 23/04/2021

    Todo está bien. El artículo está en perfecto estado.

    Comentarios
    Mostrar original
  • 03/11/2016

    I ordered 3 of then and they are all working well. I recomend to use a I2C scanner to find out the addresses, becouse i discovered that 2 of them have the address 3F and one the address 27.

    Comentarios
    Mostrar original
  • 28/07/2016

    These are very easy to use. Found this description of howto good: https://arduino-info.wikispaces.com/LCD-Blue-I2C And if you cant see any on the display when there should be, then change the contrast dial on the back side. Thought mine was broken until I turned it - so good idea to check it ;-)

    Comentarios
    Mostrar original
  • 16/03/2016

    La qualità dello schermo è più che buona, non ho riscontrato alcun problema. Per gestire lo schermo con Arduino ho usato la libreria “LiquidCrystal_I2C.h”

    Comentarios
    Mostrar original
  • 12/09/2020

    Muy buena exhibición. Es la variante I2C , sólo necesita 4 cables de conexión.

    Comentarios
    Mostrar original
  • 27/05/2017

    it took me a while to get it going on arduino but works fine now

    Comentarios
    Mostrar original
  • 04/11/2016

    Standard accessory display good quality

    Comentarios
    Mostrar original
  • 02/06/2021

    Confiable como se esperaba

    Comentarios
    Mostrar original
  • 16/05/2016

    Yet again I receive a product from BangGood which is pre-soldered in a very stupid manner. The "driver" board is soldered to the panel and has 4 right-angle male headers soldered as well. One could prefer to have the 4 pins straight (for example to put the display directly on a breadboard, which is not possible at the moment). Or one might want to run cables from the display to the driver board, so the display can be panel mounted and the driver board could be on the PCB. Or whatever. JUST STOP SOLDERING THE HEASERS, PLEASE! Or at least make it an option. Right now, if I want the headers differently, I need to desolder 16 pins first, just to be able to access the other 4, then desolder them, then solder everything again :(

    Comentarios (2)
    Mostrar original
  • 18/07/2016

    Oft ist es erforderlich oder ganz einfach praktisch kurze Nachrichten von einem uC ausgeben lassen zu können. Andererseits ist doch manchmal die Anzahl der verfügbaren I/O ein Flaschenhals. Hier ist dieses sehr günstige Modul ideal. Nur 2 I/O's sind erforderlich. Mit der Seite: https://arduino-info.wikispaces.com/LCD-Blue-I2C ist auch der Anschluss und die Inbetriebnahme ein Klacks. Rascher und problemloser Versand.

    Comentarios
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    Puedes estar interesado

    recommendation for you
    • US$17.99
    • US$12.99
    • US$19.99
    • US$4.99
    • US$5.40
    • US$17.99
    • US$8.63
    • US$37.99
    • US$7.99
    • US$16.99
    • US$14.99
    • US$12.99
    • US$3.99
    • US$19.99
    • US$13.99
    • US$10.99
    • US$36.99
    • US$8.99