I did some measurements: - Supply voltage 5.5 V - setting '40' connected - Max Uout = 4 Vtt (not bad at all) - frequency range about 50 Hz .. 20 kHz For simplicity I connected the IN- and OUT- to GND, and used IN+ as (unbalanced) input and OUT+ as output. Note: amplification can be pre-set to 10x, 20x, 30x 40x. The 'dB' in 'GAIN (dB)' as shown on the board should be just 'X'.

I did some measurements: - Supply voltage 5.5 V - setting '40' connected - Max Uout = 4 Vtt (not bad at all) - frequency range about 50 Hz .. 20 kHz For simplicity I connected the IN- and OUT- to GND, and used IN+ as (unbalanced) input and OUT+ as output. Note: amplification can be pre-set to 10x, 20x, 30x 40x. The 'dB' in 'GAIN (dB)' as shown on the board should be just 'X'.

I did some measurements: - Supply voltage 5.5 V - setting '40' connected - Max Uout = 4 Vtt (not bad at all) - frequency range about 50 Hz .. 20 kHz For simplicity I connected the IN- and OUT- to GND, and used IN+ as (unbalanced) input and OUT+ as output. Note: amplification can be pre-set to 10x, 20x, 30x 40x. The 'dB' in 'GAIN (dB)' as shown on the board should be just 'X'.

Petit preampli avec gain ajustable et mode standby.

Petit preampli avec gain ajustable et mode standby.

Petit preampli avec gain ajustable et mode standby.