Una parte de la reseña se ha traducido automáticamente.
I just had to have the IRX4+ after having owned the IRX4 for several months . I only have the Flysky 9x with stock factory firmware that the IRX4+ can plug into . And it does plug in with no issues . The IRX4+ case has been changed / upgraded to allow insertion into the back of the 9x ( Flysky ) . I was easily able to bind the 9x to my JJRC H36 and have a quick fly . I then put the IRX4+ in my Taranis Q x7 and flew the JJRC H36 again . If you are looking for a multi protocol module for your 9x / 9XR / 9XR pro and you dont want to flash the firmware . Then the IRX4+ is the module you want .
Muy buena unidad multi protocolo. Flashing fue difícil, no era capaz de flashear directamente desde mi Taranis X9D 2019. En su lugar, conéctelo a un ordenador, instale los controladores utilizando Zadig y utilice un software llamado Multi Flash. Después de la actualización del firmware está funcionando muy bien! Pude atar mis helis y mis receptores FlySky.
With the new documentation of it's creator, Pascal Langer, this module is easy to flash via the USB port : https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling_STM32.md
This is the best multiprotocol module for my Taranis Q X7 or X9D plus SE. For Taranis is the PPM yellow switch not necessery. The best function is using the protocols over the menu on the taranis. Watch I missing is the not working USB port. For the first you need to flashing a bootloader with FTDI serial module to get working the USB. Banggood - please install for the next IRX4 release a bootloader for using the USB port. Here my HowTo Video for install bootloader for USB (EN subtitles): https://youtu.be/qKsoTQQfy_4 You can get a FTDI adapter here: https://www.banggood.com/FT232RL-FTDI-USB-To-TTL-Serial-Converter-Adapter-Module-For-Arduino-p-917226.html?p=Z626141688898201505V
I use it with my Radiolink RC3S via PPM to drive a bunch of cars with 2-in-1 unit namely Mini-Q and WLtoys. It works well for every car I have. It nees some programming to configure the channels and setup so get a FTDI adapter too.
¡Trabaja en Wonder en mi Qx7S! Hay que actualizar el módulo y todo funciona a la perfección. Por lo tanto, es posible elegir el protocolo y enlazar directamente a través de la radio sin tener que manipular el interruptor en la parte posterior. Sólo déjalo en la posición alta. Entrega muy rápida en Francia. Muchas gracias, Banggood. Funciona de maravilla en mi Qx7S! Hay que actualizar el módulo y todo funciona bien. Por lo tanto, es posible elegir el protocolo y enlazar directamente a través de la radio sin tener que manipular el interruptor en la parte posterior. Sólo tienes que dejarlo en la posición alta. Entrega muy rápida en Francia. Muchas gracias, Banggood.
With this module in either my Taranis X9D Plus or Turnigy 9XR-Pro, I can bind and fly all my quads, helicopters and fixed wing aircraft.This includes the Blade Inductrix FPV, Blade Inductrix Pro FPV, Cheerson CX-95S, Syma X1, SBEGO Pocket Drone 124, Tryant 215 with FrSky XRS Rx, Blade 200SRX Heli, Blade MXR Heli and many fixed wing aircraft. This module also gives you 12 channels DSMX/DSM2, 16 Channels FrSky and telemetry if the receiver is telemetry enabled. See pictures for set up.
Ho ricevuto il prodotto in tempi brevissimi. Il modulo è veramente valido sia per ciò che concerne le caratteristiche tecniche , sia per quanto riguarda la sua installazione e settaggio. Personalmente lo utilizzo su una QX7 e il funzionamento è prefetto. Ottimo prodotto.
I was able to bind my 8 plane and drones with different receivers with no problem. RSSI goes low compared to my internal Transmitter module.
It arrived today. Looks very well made. Appears to work fine with Turnigy 9XR Pro and FrSky QX7 with the latest transmitter firmware.