Una parte de la reseña se ha traducido automáticamente.
Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.
Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!
Products delivered to you Really wonderful
replacement worked fine . Dont use 2 cell lipo. It makes the smoke come out.
Ok, this is the third CDI I’ve bought including the one that came with the blue “Hit & Miss” engine I bought last year. Hopefully this is the one that doesn’t burn up and stop working after a couple minutes of runtime. I won’t be buying another one after this, considering I’m into this engine for over $300.00 now.
I use this ignition for my own built engines.
Ware erhalten Alles bestens OK
Estimados vendedores el cargamento acaba de llegar a mí, por desgracia el sensor de la sala falta, una operación del sistema es por lo tanto No es posible. Por favor, envía esta parte después de mí. Atentamente suyo E. Rau
Utilizo estos en mis motores modelo de mi casa, son muy buenos, funcionan bien en 6 voltios y nada menos. Solo tiene que conectar un sensor de efecto Hall a través de un cable de extensión servo y su puesta en marcha.
envío rápido, mercancías super, demasiado mal que el transmisor Hall no está allí