I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

muy buen producto y buen precio. Si no sabes cómo funciona, encontré un buen tutorial. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ Si pruebas los programas y ves que no funcionan con el primero. Intente cambiar los nombres de los pines que utilizará y vuelva a cargar el programa en Arduino. p.ej. PIN_CS 10 DATAPIN 11 CLK_PIN 13

very good product and good price. If you don't know how that work i found one good tutorial. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ If you try the programs and see that they do not work with the first one. Try changing the names of the pins you will use and reload the program on Arduino. e.g. CS_PIN 10 DATAPIN 11 CLK_PIN 13

muy buen producto y buen precio. Si no sabes cómo funciona, encontré un buen tutorial. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ Si pruebas los programas y ves que no funcionan con el primero. Intente cambiar los nombres de los pines que utilizará y vuelva a cargar el programa en Arduino. p.ej. PIN_CS 10 DATAPIN 11 CLK_PIN 13