RF-Power8000 1Mhz-8000Mhz OLED medidor de potencia RF -55dBm ~ -5dBm valor de atenuación ajustable
Una parte de la reseña se ha traducido automáticamente.
Don't forget to purchase a 2W 30dB (1000 divider) attenuator to get a direct dBm display. Mine came with a +0.3dB offset so I assume it was calibrated at the factory. I tested it with various VTX 5.8GHz transmitters and the power is very accurate, I also tried to insert a set of attenuators and got a very precise value, within +/- 0.1dB range. Very convenient to check the output power or measure the attenuation on cables and SMA connectors, I don't regret my purchase.
Surprising accuracy. A fraction of the cost of another brand but readings are the same. Very happy with this power meter.
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.
Fitted a 30db attenuator to measure FPV VTX modules and it seems to do the job fine.
Mide algo, incluso podría estar bastante bien (los valores tienen algún sentido cuando se comprueba la potencia de TX). Pero el problema es: la frecuencia establecida no es con banda, parece que es una frcuencia límite superior del filtro LP, a medida que más pongo, mayor valor se mide. Así que definitivamente no mide lo que se supone que debe. También los instructuons son inexistentes, así que básicamente no tengo idea si podría arreglar el problema por mi cuenta. Por el lado bueno, se puede utilizar para comparar antenas y verificar los ajustes TX con respecto a la potencia de salida.
Аналог ImmersionRC. Измеряет уровень РЧ сигнала. Настройками задается верхняя граница частоты измеряемого сигнала и ослабление.
ok
Works ok
nice unit!
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.