Comentarios de Clientes

4.83 fuera de 5
Ver todos 12 comentarios
Escribe un Comentario
  • Todos los comentarios (12)
  • Imagen (0)
  • Video (0)
  • Todas Las Estrellas
    • Todas Las Estrellas(12)
    • 5 Estrellas(10)
    • 4 Estrellas(2)
    • 3 Estrellas(0)
    • 2 Estrellas(0)
    • 1 Estrellas(0)
Ordenar por:
Comentarios Recomendados
  • Comentarios Recomendados
  • Muy útil
  • Más Reciente
Reseñas solo de tu país (Spain)
|
Mostrar original

Una parte de la reseña se ha traducido automáticamente.

  • 08/12/2017

    - do not forget to power it separately; it won't work powered just from the microcontroller - the micro usb interface is not very useful, since you can't find any Mediatek win10 drivers. For giving serial commands, you'll need a serial forwarder uploaded intro microcontroller, like this one: https://pastebin.com/raw/xDaa1REt - the Vdd pin sets the voltage for logic levels. If connected to 3V, you can connect the board to 3V logic level breakouts, like ESP8266, without using level shifters - it has connectors for mic and headphones After this minimal setup, it seems reliable and easy to use.

    Comentarios (2)
    Mostrar original
  • 18/06/2019

    It worked fine

    Comentarios
    Mostrar original
  • 13/05/2019

    it is ok

    Comentarios
    Mostrar original
  • 09/03/2019

    received in good condition.

    Comentarios
    Mostrar original
  • matjaz
    SI
    31/01/2019

    Useful device. And it comes with all antennas!

    Comentarios
    Mostrar original
  • 19/07/2018

    Todo ha llegado en perfectas condiciones

    Comentarios
    Mostrar original
  • 21/04/2018

    I could achieve my output very easy with the help of this sim868 module I could buy this module at an affordable cost at your website.Thanks Banggood

    Comentarios
    Mostrar original
  • 15/02/2018

    Contenido en buen estado de los 5 componentes. Buena calidad de la placa y sus soldaduras.

    Comentarios
    Mostrar original
  • 12/01/2018

    Positioning software does not work, no data is transferred with AT+CGNSURC=1 or AT+CGNSTST=1 commands, AT+CGNSINF returns always zero result, like this +CGNSINF: 0,,,,,,,,,,,,,,,,,,,, Software version is Revision:1418B02SIM868M32_BT, but GNS version by AT+CGNSVER returns just 'OK', no version number is provided. GPS power is on, at GPS port TX pin there is data visible, like this: $GNGGA,135541.000,5931.430211,N,02510.642184,E,1,6,1.57,38.637,M,19.520,M,,*76 $GPGSA,A,3,30,05,15,07,20,08,,,,,,,3.30,1.57,2.90*05 $GLGSA,A,3,,,,,,,,,,,,,3.30,1.57,2.90*16 $GPGSV,3,1,11,30,70,099,16,13,51,285,,28,49,161,,07,43,083,30*78 $GPGSV,3,2,11,05,36,228,13,20,32,298,16,08,25,061,22,15,21,298,16*7E $GPGSV,3,3,11,27,16,023,,21,12,326,,09,04,130,*42 $GLGSV,3,1,10,74,89,111,,65,60,291,,72,51,188,,75,33,231,*68 $GLGSV,3,2,10,73,31,055,24,82,22,008,,83,18,062,16,66,10,330,*67 $GLGSV,3,3,10,71,06,163,,81,04,324,*68 $GNRMC,135541.000,A,5931.430211,N,02510.642184,E,1.29,351.62,120118,,,A*75 $GNVTG,351.62,T,,M,1.29,N,2.38,K,A*23 $GPACCURACY,33.5*3D

    Comentarios (1)
    Mostrar original
  • 18/12/2017

    Good value for money, comes with two antenna's.

    Comentarios
    Mostrar original
Show:

    Total 0 paginas

    Ir a la pagina

    recommendation for you
    • US$7.99
    • US$5.99
    • US$22.99
    • US$23.19
    • US$55.28
    • US$9.99
    • US$55.19
    • US$24.24
    • US$10.34
    • US$11.49
    • US$34.49
    • US$13.82
    • US$7.59
    • US$28.29
    • US$22.99
    • US$6.99
    • US$16.09
    • US$6.92