Reseñas de Módulo de cargador de batería USB de ion de litio versión 3.2V/3.7V/4.2V con función de protección

Módulo de cargador de batería USB de ion de litio versión 3.2V/3.7V/4.2V con función de protección

US$5.99
~~US$7.99~~
Compra ahora

Comentarios de Clientes

4.96 fuera de 5

Ver todos 93 comentarios

Escribe un Comentario Ganar dobles puntos de comentario si eres uno de los primeros 3 comentarios publicados.

Todos los comentarios (93)
Imagen (12)
Video (0)
Todas Las Estrellas
- Todas Las Estrellas(93)
- 5 Estrellas(89)
- 4 Estrellas(4)
- 3 Estrellas(0)
- 2 Estrellas(0)
- 1 Estrellas(0)

Ordenar por:

Comentarios Recomendados

Comentarios Recomendados
Muy útil
Más Reciente

Reseñas solo de tu país (Spain)

Mostrar original

Una parte de la reseña se ha traducido automáticamente.

bodoo69VIP3
RO
23/07/2018

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged
3

Comentarios

Mostrar original
SbvosetaVIP1
IN
20/07/2019

Good

Good

Good
1

Comentarios

Mostrar original