BG103717442 Yes it will fit with a little work. You will have to flip the pins in the connector around or resauder the wires. The rgt motor shaft will have to be grinded down or you can put a small hole in the trans cover so it doesn't rub. You will have to make new holes in the original motor plate exactly mirrored so you can mount the motor, or you can buy a 3d printed motor plate online(gamyrc). I used the stock pinion gear and used tire glue to secure it as it will spin under load if you don't glue it. Clearance wise it fits fine without flipping the trans. So ya a little work involved but its a much stronger motor than stock scx24. There's lots of detailed videos on YouTube on how to do it