Todos los mensajes

Q: Hi all is this module compatible with Ethos on the X20S ?

Preguntado por flyhappy sobre 2023-09-05 05:45:38

Kevin Yes it is. That is what I use it on. You just need to download a LUA script.

2023-09-05 11:55:39 Servicial (0)
Enviar
respuestas (1)

Kevin I have an X20 and it fits in that no problem. I believe the X18 has the same module bay. DSMX Yes SFHSS Yes

2023-03-26 06:49:39 Servicial (1)
Enviar
respuestas (2)

Q: Will this iRx4 also be compatible for Frsky x20 with Ethos OS?

Preguntado por BG531854524 sobre 2021-09-17 04:09:28

Kevin You would need to buy an adaptor to enable this to fit the X20, and then only use it in PPm mode. The X20 uses the XJT Lite slot.

2021-09-18 11:01:46 Servicial (0)
Enviar
respuestas (4)

Q: Will this also fit into the taranis x9e Jr module bay?

Preguntado por Markus Artner sobre 2021-03-29 06:41:33

Kevin Yes, it fits any STANDARD JR bay.

2021-03-29 11:36:34 Servicial (0)
Enviar
respuestas (5)

Kevin I personally only use this for smaller BNF models. I have flown them to well over 700m away. I would not trust this with my bigger I.C. engine planes. Out of the box you will need to update the firmware, but not as hard as it sounds. HTH

2021-01-09 01:10:39 Servicial (0)
Enviar
respuestas (4)

Kevin Yes it is. It goes in the bay on the back of the X9D+

2020-10-30 01:02:14 Servicial (0)
Enviar
respuestas (8)

Kevin You need a JR style bay in your TX for this to work. If it has it will work.

2020-10-21 12:10:58 Servicial (1)
Enviar
respuestas (3)

Q: is this better than the irange irx4 one? and does it come with the latest updates?

Preguntado por BG163940181 sobre 2020-09-20 04:06:14

Kevin I have no experience of the irx4 one, so can not say if this is better. If you are on Open TX then just leave the dial at 0 and use the built in options. Mine came needing an update and has had two since then. It is an ever evolving piece of software, so it goes out of date rapidly.

2020-09-21 12:38:53 Servicial (1)
Enviar
respuestas (3)

Q: is the metal scale included in the set? thanks

Preguntado por rwneto sobre 2020-09-03 07:52:34

Kevin Yes.You get the ruler as part of the package. It is a great bit of kit for the money.

2020-09-19 01:33:01 Servicial (0)
Enviar
respuestas (4)

Q: Does the filament have to be 1.75 PLA??

Preguntado por BG331423481 sobre 2020-08-16 10:59:25

Kevin Yes. As it come`s stock you need to use 1.75mm You can use any filament like PLA ABS PETG

2020-08-17 12:28:23 Servicial (1)
Enviar
respuestas (9)

Q: Is the device allowed to enter Bahrain?

Preguntado por BG101435649 sobre 2020-06-06 02:12:21

Kevin Idon`t see why not. But that would depend on local laws and regulations.

2020-06-10 01:05:45 Servicial (0)
Enviar
respuestas (5)

Q: what kind of connector does it have? EUA? to clarify, the cable that goes to power

Preguntado por toastyhades711 sobre 2020-06-04 07:43:42

Kevin Iordered from the CZ warehouse and it came with a European style plug. I changed it for a UK style lead. No problem.

2020-06-10 01:04:54 Servicial (0)
Enviar
respuestas (1)

Q: Is the bed a sticker or not? On some ender -3s it is a removable.

Preguntado por BG321649431 sobre 2020-06-08 10:50:28

Kevin Noit is not a sticker. Mine is fully removable and held on by small clips.

2020-06-10 01:03:39 Servicial (1)
Enviar
respuestas (3)