kelkie
Q: is this suitable for 18650 battery's
Preguntado por kelkie sobre 2022-05-22 05:25:24
BG544584744 No
2023-01-04 09:25:55 Servicial (0)
kelkie whattemp would you suggest as far as im concerned its crap but reading this im questioning my opinion on this stuff. thanks for review
Q: Is this lighter than average pla?
Preguntado por kelkie sobre 2020-12-23 07:22:58
ImagineWorks Weightnetto 750grams. This was my first PLA and works great with the stock PLA setting of my printer of 210°C ~ 195°C, print speed 40 ~90 mm.p.s. They claim < ± 0.05 ~0.02mm accuracy. I measure between 1.75 - 1.74mm and use white - grey - black filament of this brand. Made fine prints with this.
2020-12-26 05:02:42 Servicial (1)
kelkie 14.4 is 4s dude. please use calculator 11.1 is 3s 2s 7.4. what 7.4 x2 =
2021-07-20 05:09:45 Servicial (0)Q: which one do we believe????? Battery: 2-4 Li-po or Voltage: 7.4 -11.1 V
Preguntado por kelkie sobre 2020-06-12 02:57:54
JLT_GTI the motor can take 2 to 4S .. but you will need to use a propeller so it wont go over the max Watts (270 acording to description) you would need a watt meter to test it or use an online power calculator considering its a 1000kv motor .. For example if you get 270W on 3S with a propeller you cant use the same propeller with 4S but could use a bigger one in 2S the key is not over-loading the motor
2020-06-22 10:44:44 Servicial (4)
kelkie you must also buy a transmitter. i suggest the tx16s iit is a great all transmitter that will grow with you and your hobby. hope this helps. also load of batteries and a pair of goggles
2021-05-11 04:27:15 Servicial (1)Q: Is it possible to control more then 1 set of these separately?
Preguntado por kelkie sobre 2020-12-27 04:37:31
Yuki Not sure, I only bougth one set
2021-01-05 03:51:58 Servicial (0)Q: could you please tell me what the app is that it uses? so i can check it out while on the way to me
Preguntado por kelkie sobre 2020-12-27 04:47:23
The seller LEDLAMP，scanning the QR code on the controller
2021-01-04 06:19:19 Servicial (0)Q: Is it possible to cut the LED stripes and use connectors? thanks
Preguntado por matreco sobre 2020-12-08 06:27:22
kelkie yes it is possible. if you look at the strip there is solder or connector points x4. it is also possible to get joint and angle parts to attach.hope this helps.
2020-12-27 04:29:39 Servicial (1)Q: What's the 4 wire configuration on the plug? RSSI for the 4 the wire?
Preguntado por Joe Cord sobre 2020-11-23 06:04:45
kelkie 5v, ground, ppm, and sbus are the 4 pins on the plug. look at last pic on the item page.
2020-11-24 04:17:52 Servicial (1)
Q: hello, Can I connect a GPS module on this product?
Preguntado por asuka15 sobre 2019-06-18 07:12:10
kelkie yes u can use a gps o this and also a compass. use uart2 and scl sda for compass. hope this help please like
2020-11-08 08:09:17 Servicial (7)
kelkie same here it is a fault tell bg team they will sort u out
2020-10-10 05:51:02 Servicial (1)Q: Will these motors (https ://banggood.app.link/urkmiKvRpab) work and won't destroy ESC board?
Preguntado por BG534610352 sobre 2020-10-08 07:27:48
kelkie please give a proper link i cant access it. or tell me what motors you are looking at
2020-10-10 05:47:46 Servicial (0)Q: Where can i find a controler software for this, help without it its useless?
Preguntado por Tiago Carvalho sobre 2018-10-11 02:15:29
kelkie rx-pitch and rx-roll are pwm inputs
2020-09-10 06:45:42 Servicial (0)
¡Te invitamos sinceramente a suscribirte al correo electrónico de respuesta de invitación!
Si se suscribe, lo invitaremos por correo electrónico para que responda las preguntas que la gente tenga sobre los productos. ¡Al suscribirte, también ganarás la "Insignia útil "! Puede darse de baja en cualquier momento en la página de configuración de privacidad.
¡Ayuda a los demás y sé más feliz!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
