Mejores ofertas para Carpintería,Abrazadera de carpintería,Guía de corte fino FONSON Woodworking

trevordennis 10/03/2023

There's a minimum hole size that this works on. The hole/slot has to be large enough for the stepped lower part of the tool to fit inside. If you were building a bench with mortise and tenon joints you'd be OK, but smaller projects, not so much so.

Cincel de esquina Drillpro para huecos de bisagras cuadradas incrustadas. Herramienta de tallado en madera

6,51€ 19,56€

0

Comentarios (0)

trevordennis 10/03/2023

I am nicely surprised by this item. It grips like a bastard, and is a lot more effective than my hammer-down hold-down clamps. It does not work with think material, but is perfect for your average plank.

Abrazadera de sujeción de mesa de carpintería ENJOYWOOD de aleación de aluminio MFT para prensar manualmente de forma rápida la placa de prensado de sobremesa de carpintería, accesorios de maquinaria de carpintería, abrazaderas de bricolaje

22,36€ 37,27€

0

Comentarios (0)

trevordennis 10/03/2023

As standard, the bearings would not extend far enough out to reach the blade on my DeWalt saw, but it was a simple job to make an extension. Other than that, it is well made with decent tolerances.

Guía de corte delgada FONSON Woodworking para sierra de mesa de alta velocidad con límite de corte deslizante y herramienta de posicionamiento ajustable de pista T

21,42€ 46,58€

0

Comentarios (0)

trevordennis 09/03/2021

Excellent value. Extremely well made and functional. I Love that the clamps also include two 20mm dogs (one per clamp) which happen to fit my wood working bench. Image also shows T-slot and 6mm star grip knobs (as fence clamps) all sourced from Bangood).

Abrazadera de sujeción rápida HONGDUI Rojo de aleación de aluminio con ranura en T, juego de abrazadera de pista para herramienta de carpintería para mesa de carpintería

16,13€ 18,63€

2

Comentarios (0)

trevordennis 09/03/2021

For the price these are OK, but if zeroed at one end of the scale, they both show a few hundreds error at the other end of the scale. They are still useful as comparative measurement if you have something to calibrate them which is close to what you are working on. 1-2-3 blocks Are good for this. (I have two sets of Chinese 1-2-3 blocks and they are amazingly accurate.)

0-25 mm / 25-50 mm Micrómetro de Graduación Externo Métrico con Caso

16,76€ 20,49€

0

Comentarios (0)

trevordennis 15/04/2020

Delayed delivery probably caused by covid lock down. The blocks where very square and of excellent quality. The only problem being that Bangood sent me 1" x 2" x 3" blocks despite the box they came in being marked as 25-50-75mm. Bangood offered to discount the sale and give me some points which I agreed to. I already owned a set of 1-2-3 blocks and specifically needed metric, so it looks like I am going to end up with three sets. I don't mind too much. I use them constantly including with woodwork. The entire complaint process took about 36 hours which I thought was excellent. It might have been even quicker if I had initially provided the SKU number and a photo of the label.

Machifit 2pcs 25x50x75mm Bloques de Clavado Paralelos con 23 Agujeros Herramientas de Torno de Precisión 0.005mm

32,14€ 55,90€

4

Comentarios (1)

trevordennis 21/11/2020

The 25-50mm comes with a 25mm calibration bar which is not parallel by a couple of hundredths edge to edge. Calibrating the mic at 50mm leaves .02mm error at 25mm. I also have the 0-25mm which has .04mm when zeroed at 0mm and checked at 25mm. They are still useful as a relative size measuring tool, but not so much for absolute size measuring. (checked against 1-2-3 blocks and a Starrett 0-1" mic) But the price is just amazing, and delivery (for both of them) was as fast as anything I have bought from Bangood, so I am still happy with them.

0-25 mm / 25-50 mm Micrómetro de Graduación Externo Métrico con Caso

16,76€ 20,49€

0

Comentarios (0)

trevordennis 16/09/2019

An excellent product. I've used it on stainless steel and it chamferred the edge and did not mark the tool. A very welcome addition to my ever growing toolbox thanks to Bangood.

Drillpro Chamfer Tool Countersunk Blade BC1041 BC1651 BC8301 BC6301 Deburring System Trimming Tool

12,91€ 13,97€

2

Comentarios (0)

trevordennis 16/04/2020

What a great idea. This tool has greatly improved my ability to drill perpendicular holes. It is well made and has an excellent finish. My only problem was that it allows a minimal hole depth before the chuck contacts the tool. No problem with low diameter holes, but with Forstner bits I had to make an extension which would have been difficult for anyone not possessing a lathe.

Kit de sistema de carpintería. Plantilla de perforación para agujeros verticales. Herramienta de carpintería para perforar rápidamente madera.

27,97€ 29,81€

1

Comentarios (0)

trevordennis 08/06/2020

Reasonable delivery time.

Regla métrica autoadhesiva con escala de sierra para inglete de acero para la mesa de enrutador de T-Track Sierra de cinta Herramienta para trabajar la madera

7,49€ 9,31€

0

Comentarios (0)

trevordennis 08/06/2020

Sensational value and a versatile selection of components. I ordered two sets — one for a project and the other for my special bits and pieces draw, but I am sure I'll be needing to order more soon.

Mordaza de sujeción de acción rápida para herramientas de carpintería Drillpro, accesorio para ranuras en forma de T T-Tracks

5,86€ 9,31€

0

Comentarios (0)

trevordennis 04/12/2019

Good quality cutters hard as can be, but you need to be careful not to knock them as the corners are brittle.

8pcs 2-12mm Carburo End Mill 4 Flautas Fresa de acero de tungsteno CNC herramientas Set

39,37€ 48,75€

0

Comentarios (0)

trevordennis 22/08/2019

I have no idea how they can sell this so cheaply. It is a precision item beautifully made, and completely functional. It arrived quicker than I expected but the packing was just some thin plastic wrapped around it inside the thin plastic envelope that Chinese imports tend to be shipped in. If considering this, take note of the 20mm shaft size — you are probably going to need a collet set to use it. It comes without a battery, but the A23 will be available at a decent supermarket. It is used without the spindle rotating, so does not cancel out a non-concentric spindle. In fact I discovered a tiny run out on the mill-drill I am using it with. I own two other edge finders, so I will use this when I have the collet chuck fitted, and my home made ball bearing edge finder when I have a chuck fitted.

Precision Electronic Digital Edge Sensor con buscador de fresado de LED pitidos

17,70€ 24,22€

0

Comentarios (0)

trevordennis 12/11/2019

Outstanding value for money

6 pulgadas de profundidad de clip de bolsillo longitud Regla Escala Medición de marcado de calibre herramienta Regla recta recta

12,91€ 13,97€

0

Comentarios (0)

trevordennis 12/11/2019

reasonably quick delivery by wish.com standards

Mango para fresas NB1100 Mango para desbarbado de la barra de afeitar herramienta Herramienta de corte

9,67€ 10,24€

0

Comentarios (0)

trevordennis 12/11/2019

Incredible value. It works perfectly with absolutely no lip when swapping between using the bottom bearing and the template below the work piece, and changing to the top bearing with the template above the work piece. Had minimal tear out when used on radiata pine and birch plywood. Totally happy, and it arrived on the very day I most needed it.

1/2 Inch Tapa de fresado a ras del borde Tapa superior con cojinete inferior Carpintería herramienta

13,12€ 13,97€

0

Comentarios (0)

trevordennis 16/10/2019

Exactly as described. Very pleased

Herramienta de fresado y grabado Machifit de 200 mm, cuadrada, de 6/8/10/12 mm, de acero de alta velocidad

8,60€ 9,31€

0

Comentarios (0)

trevordennis 16/10/2019

For a precision square, the accuracy was not what it should have been.

Escuadra de precisión del maquinista Drillpro Machinist Precision Edge 90º

16,07€ 18,63€

0

Comentarios (0)

trevordennis 16/10/2019

Powerful and exactly what I needed for a particular project. Very pleased.

Effetool 50pcs N50 10x3mm Imanes de Anillo Fuertes con Agujero de 3mm de Magnetos de Neodimio de Tierras Raras

13,98€ 14,90€

0

Comentarios (0)

3 uds ER32 1/8 1/4 1/2 CNC primavera Collet tallado máquina fresadora Collet Chuck torno herramientas

15,15€ 20,62€

Q: Hi! Can you offer me ER32 collet with 25mm hole? Thanks Denis

Preguntado por progti sobre 2019-05-03 06:47:58

trevordennis I'd be surprised if an E32 holder would be big enough to accommodate a 1" hole. 20mm is the largest in my collection.

2019-08-22 09:10:44 Servicial

Enviar

respuestas (3)

Bienvenido a Banggood,

Usted permite:

Todos los mensajes

Usted es el experto, ¿puede ayudarme?

Sobre insignias

About Badges

Helpful Badges

Are you ready to help?