Mejores ofertas para Nueva escuadra de inglete mejorada,Endoscopio inalámbrico,Carpintería

BG223516120 15/12/2020

Nice piece. Bronze handle is solid brass and so heavy. A little bit sharp knurling, but it's OK. That little lock plate to precisely set angles at the end of the tool has quite sharp edges, probably not finished at all. Also teeth on the curved scale piece are sharp to touch. One completely loose screw, that tiny one to level the fence was completely free and roaming around the package, and thank god it was not lost during shipment. Same as with with fence I bought with this (https://www.banggood.com/Drillpro-30x60x450mm-Aluminum-Box-Joint-Jig-Kit-For-Miter-Gauge-Woodworking-Tool-p-1400439.html) On the tip of the rail guide there is a plate at bottom to prevent it from lifting up off the t-track, but there is no such plate at the back. Yes, there is a handle so I should be able to keep an eye on this. Will see how it will work. It just arrived so I haven't tested it yet (no T-Tracks yet in table). Generally nice tool.

Nuevo medidor de ingletes con mango de latón para mesa/sierra de sierra de enrutador, conjunto de sierra de ingletes de medición de inglete

46,58€ 93,18€

2

Comentarios (0)

BlitzWolf BW-YPC110 Endoscopio inalámbrico 8 mm 2.0MP 1200P HD Boroscopio WiFi Inspección de serpiente Cámara 8 luces ajustables LED para teléfonos inteligentes iOS y tabletas Android

32,28€ 33,54€

Q: Waterproof cap .. does it mean that camera is NOT waterproof without it? And so if the cap is on, then not other tool like hook/magnet can be on as well?

Preguntado por BG223516120 sobre 2020-12-29 08:13:17

kostya1133 в воду нельзя

2021-11-13 10:53:29 Servicial (1)

Enviar

respuestas (3)

BlitzWolf BW-YPC110 Endoscopio inalámbrico 8 mm 2.0MP 1200P HD Boroscopio WiFi Inspección de serpiente Cámara 8 luces ajustables LED para teléfonos inteligentes iOS y tabletas Android

32,28€ 33,54€

Q: How rigid is (will be) the cable ?

Preguntado por BG223516120 sobre 2020-12-29 08:14:13

Osmac X Hi, I haven't used it for length yet . It's a cable, not a rod . I assume he can handle short distances without support . And it is according to individual needs

2021-03-25 07:13:09 Servicial (1)

Enviar

respuestas (3)

BG223516120 30/11/2020

Red elox aluminum looks good and I hope it will not fall and so stays true. Fits easily other rulers or straight edges, however not all. Slot is some 38mm wide, so my 40mm rulers do not fit :-( I used calipers + other metal rulers to check the scale of provided 30 cm (back side in inches) and it seems to be correct. Casted body seems reasonably square (inner) and in 45/90/225 angle. Enough for center finding or raw angle measurements for general woodworking/timber-framing, I would think twice for using it for precise cabinet making of other fine woodworking. Seems not suitable for precise metalworking but to be fair it is not meant to be that kind of tool/precision grade. Magnet is strong enough to keep ruler in, but allows it to be easily removed or position adjusted without risk of body/ruler falling off even without knurled knob holding ruler being tight.

Buscador de trazador de centro magnético para carpintería YX-3, regla de calibre de línea de ángulo de 45 90 grados, métrica y trazador de medición de madera Inch herramienta

25,15€ 30,74€

1

Comentarios (0)

BG223516120 30/11/2020

Just arrived and looks good. Writes good. Will see how long it will last, as one of my permanent markers is with me for more then 5 years, while others did not last more than a year and dried out. Point seems sharp enough, but actual footprint, drawn line, seems like 0.7+ in thickness (bit wider on softer materials so it soaks a bit). I'd appreciate thinner line, like 0.5 or even 0.3. But that is still fantastic pen because of long tip to write through templates, as broken pencils/micropencils are simply point-less ;-)

Marcador de punta larga multifunción para carpintería de 20 mm Pluma Marcador de profundidad de madera para hardware Plumas

8,60€ 9,31€

1

Comentarios (0)

Drillpro Acero inoxidable 360 grados Mini inclinómetro digital Caja de nivel electrónico Base magnética Herramientas de medición

27,01€ 42,86€

Q: Is it waterproof (what's IP rating) ?

Preguntado por BG223516120 sobre 2020-11-30 01:13:16

BG852143701 Ithink isn't waterproof.

2021-02-26 04:57:14 Servicial (1)

Enviar

respuestas (1)

BG223516120 15/12/2020

Thanks to aluminum profile and oval holes in miter it fits to miter gauge quite well. I was a bit worried about this and especially miter gauge and tip of it's rail guide rod as package was a bit squashed at the corner, but it seems OK. Few screws were way too loose and one completely free flying inside package. So assembly could be better and more careful.

Nuevo juego de herramientas de carpintería Wnew, calibre de inglete de aluminio de 30x60x450 mm para junta de caja para mesa de fresado y sierra de mesa

35,40€ 65,22€

3

Comentarios (0)

BG223516120 15/12/2020

Base is hair under 11cm, so it's more like ruler then square. Knurled nuts are a bit loose so it offers ability to make it true, but it's not true from factory, pay attention to it. Mine came with a bit sharp bend close to the end, see photos, not sure where it happened. Otherwise it is fine cut ruler, with tiny increments. Ballpoint 0.5 do not fit, but I use micro-pencils or knives anyway (knife might not be right option here).

Regla de marcado de precisión de acero inoxidable Drillpro 200/300/400 mm para posicionamiento de agujeros. Regla de medición para trabajos en madera. Herramienta para marcar.

16,76€ 22,36€

2

Comentarios (0)

BG223516120 11/11/2020

Looks well built and adequate to the price. Anodized aluminum slides well. Bronze curl knobs fit to fingers. Nothing too sharp to touch. Smooth precise surfaces and color coded sliders. Bonus, it came in little metal box with foam inlay. I'll just cut there two incline points for better grip when polling tool out. But it's good that I can cut/make them whenever it fits to me. Good tracking of the package. Enough info sent from shop about delivery statuses when they changed. Swift delivery from some local in-country storage (delivered in just 2 days). Tracking overshoot (came earlier then expected) delivery date (which was set with time precision to seconds :-) ), but it's far better then delayed delivery, for sure. Good service so far.

Drillpro Ajustador de ranura para sierra de mesa mortaja y espiga herramienta Bloque de medición móvil para carpintería herramienta

26,70€ 33,06€

1

Comentarios (0)

Juego de 12 fresas de carburo de tungsteno con vástago de 8 mm y estuche de madera para cortar madera de Drillpro

32,28€ 33,54€

Q: What is the difference between Drillpro router bits in red, yellow, blue, green and black color ? Those seems to me pretty similar, so I'm a bit confused.

Preguntado por BG223516120 sobre 2020-12-26 03:03:37

Katydid It's just the outer coating color is different, the material is no different.

2021-01-06 06:34:06 Servicial

Enviar

respuestas (1)

Bisagra oculta de acero inoxidable Bisagra de puerta con forma de boca de pollo de 7 formas Hardware giratorio de 360 grados

6,45€ 7,45€

Q: What are all dimensions of both L and S size?

Preguntado por BG223516120 sobre 2020-12-29 08:37:52

Enviar

respuestas (0)

BG223516120 28/12/2020

Nice AL extrusions, expected quality. However I would recommend to seller to improve packing or to buyer to purchase those in a bigger quantities, so those will support each other in transit. As smaller t-tracks I purchased before had bubble-wrapped ends. But those bigger ones came just in tiny miralon + heavily wrapped to just plastic bag + tiny caps. Yes, thankfully, they had extra plastic thin end-caps, which probably saved them, as those end-caps came shattered partially and saved corners a bit. One another thing I'd like to is to purchase those in longer variant, as 1m seems to be a maximum, but with 1200mm there will be more useful offcuts from those. Otherwise it seems they came without any visual bending. Going to workshop to check and mount them into table.

Drillpro 100-1200mm T-slot T-pista Accesorio de corte Ranura 30x12.8mm Para sierra de mesa mesa de enrutador Herramienta de carpintería

11,17€ 12,10€

0

Comentarios (0)

BG223516120 21/12/2020

Looks solid and pretty adjustable (same as miter jig). Predrilled holes are threaded. Sliding disks on both ends to prevent mi jigs and sleds from popping out of track. Just arrived, and so not mounted into anything yet. but can't wait to do so.

300mm 450mm Barra deslizante de ranura en T para mesa de sierra de calar de madera

15,06€ 15,83€

0

Comentarios (0)

BG223516120 15/12/2020

Nice finish and square according to DIN square.

VEIKO 2 Set de cuadrados de sujeción de precisión para carpintería con soporte auxiliar en forma de L

37,27€ 46,58€

0

Comentarios (0)

BG223516120 15/12/2020

Looks good and ordered in qty:3 in hope that they'll not come bended if bundled in pack. And it came OK.

ENJOYWOOD Ranura en T T-Pista Miter Pista T Tornillo 300-1220mm Fixación Ranura 19x9.5mm Para Mesa de Sierra, Mesa de Enrutador, Herramienta de Carpintería

11,17€ 18,63€

0

Comentarios (0)

BG223516120 10/12/2020

Finally and silently landed in my mailbox, today. Packed just in plastic bags and tiny bit of bubble sack. A bit rough grind on the facets of the reamer, but generally looks good. Not tested yet.

Herramienta de carpintería Drillpro de cono cónico, con mango en T, reamer manual para agujero de pasador de puente de 3-13mm y 6 ángulos de biselado

11,83€ 13,04€

0

Comentarios (0)

Geekcreit® 2500W 48V 50A Módulo de Inducción de Calentamiento ZVS Máquina de Calentamiento de Alta Frecuencia Bobina de Metal fundido Con Fuente de Alimentación Kit Completo

246,47€ 306,57€

Q: Hi why the power supply even without load gives me the red light and has no power? Who can help me

Preguntado por BG215591013 sobre 2020-12-01 05:02:52

BG223516120 I think I seen (nor big&red enough) warning in the text above to NOT turn power supply without any load, and some comments that it will not work OK and break itself.

2020-12-03 08:13:30 Servicial

Enviar

respuestas (1)