Todos los mensajes

Q: Good evening, How do I put the device in pairing mode?

Preguntado por Red Xela sobre 2020-01-16 06:40:08

angmores just enable Bluetooth and Search for new devices

2024-03-05 03:59:32 Servicial (0)
Enviar
respuestas (2)

Q: Do you have a specific die/jaws for JST HX terminals ?

Preguntado por Alfio sobre 2023-06-07 12:21:03

angmores yes there 4 or 5 different jaws

2024-03-05 03:58:44 Servicial (0)
Enviar
respuestas (1)

Q: la pantalla es de vidrio templado?

Preguntado por Oregel sobre 2019-12-24 03:42:42

angmores No, it's plastic

2024-03-05 03:58:09 Servicial (0)
Enviar
respuestas (4)

Q: What is the jumper for? It's in the WiFi DIY Smart Swith box.

Preguntado por Polleke sobre 2019-08-07 07:09:31

angmores The jumper is needed only in case you want to reflash (reprogram) a custom firmware. That's why the product is called DIY.... because you could modify it if you want. without soldering.

2021-10-01 01:38:38 Servicial (0)
Enviar
respuestas (5)

Q: funciona no xiaomi mi 8 lite?

Preguntado por josehenrique.go sobre 2019-02-26 11:53:19

angmores Yes, for sure as for any phone with usb-c connector....

2021-10-01 01:36:54 Servicial (0)
Enviar
respuestas (4)

angmores You could do that with an app. But outside the home network, relying on foreign servers and exposing the camera to the internet, it's strongly dangerous. almost anyone can get in and watch... The firmware is very old and totally outdated. It works anyway...

2021-06-28 12:33:22 Servicial (0)
Enviar
respuestas (3)

Q: my device has bluetooth 4 can these earphones work with it?

Preguntado por maymark32 sobre 2021-03-02 08:38:57

angmores My Huawei p30 Lite is working perfectly and my Samsung tablet A6 too.

2021-03-02 02:27:20 Servicial (1)
Enviar
respuestas (12)

Q: Where can I install the heatsink ? No mentionned on the pict.

Preguntado por ghyoot sobre 2020-10-22 06:06:48

angmores Hello, you should paste it with heatsink adhesive tape, probably already on the heatsink itself, on the integrated circuit in the middle of the board. The black one with a metal pad in the center. Hope will help. bye. Angelo. Italy.

2020-10-22 11:24:15 Servicial (1)
Enviar
respuestas (2)

Q: is the output power really 3w only? If so this is not a power amp!

Preguntado por rtsixt sobre 2020-06-01 12:55:20

angmores without considering that power is difficult to achieve by vacuum tubes. Always high efficiency loudspeaker have to be used. And yes the power will more than enough in a normal apartment.

2020-09-07 07:56:11 Servicial (2)
Enviar
respuestas (6)

Q: Can we use the digital part with 3v3 voltage instead of 5v ?

Preguntado por rdezon sobre 2020-02-10 09:06:09

angmores No, sorry. 5 volts are required.

2020-02-14 03:06:49 Servicial (1)
Enviar
respuestas (2)