Todos los mensajes

Q: vocês não respondem às perguntas ?

Preguntado por NELSONPEREIRA sobre 2019-05-21 11:30:29

gfconsuegra Sorry,I missed your question. Could you ask again?

2022-07-09 06:43:53 Servicial (0)
Enviar
respuestas (1)

Q: hi, can it break and reverse ? thanks

Preguntado por leaafriends sobre 2019-12-17 09:13:10

gfconsuegra Nobreak that I know of. Reverse can be achieved by changing two of the three motor wires.

2022-07-09 06:43:06 Servicial (0)
Enviar
respuestas (2)

Q: Are all the instructions in english?

Preguntado por rvb sobre 2018-12-20 07:33:36

gfconsuegra LimitedEnglish instructions, mostly pictures

2022-07-09 06:40:05 Servicial (0)
Enviar
respuestas (1)

Q: can this motor be used for a heavy lift quadcopter 10” props?

Preguntado por BG223253816 sobre 2022-07-05 07:19:13

gfconsuegra This is a high quality motor. I am using it on a low-wing fixed wing model that weighs under 40 oz. With a lipo 3-cell pack and an 8 x 6 prop, I am getting about 240 watts of thrust and drawing 22 amps, which makes this model quite agile. I am not a quad builder or flyer, so I can't really advise you. I would determine how much thrust you need for your project and consider these data: Prop 8 x 6 9 x 6E 10 x 7 11 x 6 Plane Weight lbs 2.9 3.2 3.3 4.6 Amps 22 24 35 37 Watts 240 270 275 380 Best of luck

2022-07-09 12:13:10 Servicial (0)
Enviar
respuestas (1)

gfconsuegra I have been working on this kit, slowly, for more than a month. The fuselage and both stabilizers went together nicely. However, the wing has been difficult. Seems at least one instruction photo had mislabeled parts. Also a part here and there was either missing or I lost them but I was able to construct them without issues. I am impressed with the hardware package. The designer probably has not built before as there is no way to insert the battery pack as shown and access to the motor connection/ESC underneath is not provided. I was able to modify using my own wood as needed. This kit is only for an experienced builder. I do like the overall design, and I expect it to be a good flyer. Overall, as an experienced scratch builder, I was happy that I did not have to cut out the parts needed for such a project. I will provide more details after the maiden flight.

gfconsuegra 08/02/2022
0
Comentarios (1)

gfconsuegra Este ESC son compatible con su motor y bateria. Pero Tenga cuidado con la helice. No exceda los 25 amperios. Bueno suerte.

2021-06-24 10:30:29 Servicial (1)
Enviar
respuestas (2)

gfconsuegra I understand your issue better. It seems to me that considering the design of the unit, your desire of a different location of the pins is not immediately possible. I have doubts that a change could be or would be made. Having used several units similar to this one, all of slightly different designs and manufactures, I note that all have pins on top rather than on the back. Perhaps you should consider moving the gyro to a different location that does not necessitate pins that protrude from the rear. Best of luck to you.

2021-06-01 02:49:53 Servicial (1)
Enviar
respuestas (3)

Q: can i use this for a car? just for left and right "rudder" control.

Preguntado por BG225341535 sobre 2020-04-22 05:01:56

gfconsuegra I am pretty sure you could use it on a car using the rudder connections.

2021-04-03 12:07:41 Servicial (0)
Enviar
respuestas (2)