akestor
Q: no magnet included with mine. I can find one. how far do I mount the pickup from the magnet?
Preguntado por BG229154038 sobre 2021-12-07 04:18:32
Zosterops you can have a test
2020-08-06 05:09:33 Servicial (0)Q: In the room it is 30C but shows it is 2.5C. Can i calibrate this to show the correct temperature?
Preguntado por akestor sobre 2020-06-29 02:40:30
Oth_zenGeta Yeah,it can be calibrated to display the correct temperature.
2020-07-01 09:39:28 Servicial (0)Q: Which library should be installed for this to work?
Preguntado por akestor sobre 2020-06-14 03:42:21
Felicity sorry not sure for that.
2020-06-22 04:32:35 Servicial (0)
Eric No, you need to match successfully to use.
2020-06-10 10:06:40 Servicial (0)Q: What is the function of the jumper?
Preguntado por akestor sobre 2020-05-19 01:52:14
Screem to change the woring mode. (Jog,Self -lock,Inter-lock)
2020-05-29 01:48:26 Servicial (1)
akestor Ithink that you can do this because they are both at 315hz frequency. I have 1 relay that works with an extra remote control i got in case the first gets lost.
2020-05-22 02:28:14 Servicial (0)Q: Does it come with the magnet?
Preguntado por Edmundo sobre 2019-10-14 11:36:02
akestor Yesit comes with the magnet!
2020-05-22 02:25:16 Servicial (0)
Q: how can I erase remote controller.?
Preguntado por politek sobre 2019-03-07 10:51:34
akestor Idon't think it can be erased. In a video, pushing the button 8 times would erase memory but it is not exactly the same. I think it works only at self-lock mode
2020-05-18 02:23:15 Servicial (0)
Q: How to connect to a 12v small bulb? Of the 3 outputs which are the positive(+) and the negative(-)?
Preguntado por akestor sobre 2020-05-06 04:13:20
Penniferous https://imgaz.staticbg.com/images/oaupload/banggood/images/A6/0E/6270100d-5fe0-47f4-ad9c-28c95e5423ff.jpg.webp
2020-05-13 04:01:48 Servicial (0)
akestor I found out how to wire the relay. 1) Connect 12v power on the and - terminals of the relay. 2) Connect the negative wire of the load also at the negative terminal of the relay. 3) Connect an extra wire from the positive terminal of the relay to the COM terminal 4) Connect the positive wire of the load in the NO terminal Thats all ! Ready to work!
¡Te invitamos sinceramente a suscribirte al correo electrónico de respuesta de invitación!
Si se suscribe, lo invitaremos por correo electrónico para que responda las preguntas que la gente tenga sobre los productos. ¡Al suscribirte, también ganarás la "Insignia útil "! Puede darse de baja en cualquier momento en la página de configuración de privacidad.
¡Ayuda a los demás y sé más feliz!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
akestor Around 8-10mm will be fine
2021-12-07 04:42:34 Servicial (0)