Todos los mensajes

Reese_000 assuming that you are talking about the RC832 FPV receiver, you should be able to stick the RCA jack from the monocular into the middle jack in the rc832 receiver. If you are talking about a different receiver and have AV cable outputs, then you can get an AV to RCA adapter and it should work fine, or you can cut the RCA cable and solder the video wire from the RCA cable to the yellow AV cable.

2021-12-17 05:42:48 Servicial (0)
Enviar
respuestas (1)

Q: What is the pin-out for this device

Preguntado por orclah sobre 2021-10-03 01:18:43

Reese_000 it has positive, negative, and analog video.

2021-10-03 04:28:46 Servicial (1)
Enviar
respuestas (3)

Reese_000 480p is the only resolution for this specific display but you might be able to find other products with slightly higher resolution elsewhere

2021-02-18 05:14:23 Servicial (0)
Enviar
respuestas (1)

Q: Who knows how much weight this thing can carry

Preguntado por GEO_KIT sobre 2021-01-05 08:58:01

Reese_000 none it can barely carry the camera. I bought some slightly larger than stock batteries and it kept falling out of the air at max throttle.

2021-01-05 01:37:04 Servicial (1)
Enviar
respuestas (3)

Q: What Google's do you recommend

Preguntado por BG401044834 sobre 2020-04-21 01:38:39

Reese_000 most people would probably recommend the EV800D or EV800. EV800D has dvr and diversity antennas for better directional range compared to the EV800.

2020-04-22 11:43:55 Servicial (0)
Enviar
respuestas (6)

Q: Is the av cable 2.5mm or 3.5mm

Preguntado por Reese_000 sobre 2020-03-30 09:45:36

rafhit 3.5mm

2020-04-02 04:05:37 Servicial (1)
Enviar
respuestas (1)

Q: Will the Caddx EOS2 work with this drone

Preguntado por Reese_000 sobre 2019-10-19 12:58:09

Samchan It can not fit.

2019-10-29 10:47:41 Servicial (0)
Enviar
respuestas (1)