Todos los mensajes

Q: is this stock ready???

Preguntado por raqbel sobre 2020-05-02 09:08:53

Black_Dog blue-bird-model.com use the search box for BMS-210DMH, you will have to contact them, explain its for the LR tricopter from RCExplorer and has a feedback wire and they maybe able to help, David had these custom made by bluebird with a feedback wire the servo was a BMS-210DMH The website is pretty slow so give it time and keep trying, their page will come up eventually. Otherwise you could try Turnigy TGY210DMH , TGY210H, TGY211DMH, Hitec HS82MG (A little underated but seems to work for some) or you could try these https://www.banggood.com/4X-Towerpro-MG92B-Robot-13_8g-3_5KG-Torque-Mental-Gear-Digital-Servo-p-981038.html?rmmds=myorder

2022-07-23 06:25:23 Servicial (0)
Enviar
respuestas (2)

Black_Dog Hi, It will take 9 inch props, personally I'd avoid them especially if you are running 1600kV motors it flies super smooth on 8inch if you stick with the spec , besides it would stress the 1600kV motors, you could switch motors to spin a bigger prop to say about 1000kV or even 900kV also make sure the props you use are well balanced using a prop balancer, if you don't know how to do this there are plenty of tutorials on YT. This is an awesome tricopter and flies great on well balanced props good luck and happy flying.

2022-07-23 05:50:14 Servicial (0)
Enviar
respuestas (1)

Black_Dog Hi Yasen, I would not trust this for a C5 as there have been problems reported with it by many users on Citroen forums, you would be taking a risk if you bought it, though I did see one person here mention that it works? this is just my opinion from reports I have read , I do not own a Citroen C5 so cannot give you a definite answer - sorry.

2022-05-19 04:25:41 Servicial (0)
Enviar
respuestas (1)

Q: Is the light splash or water proof?

Preguntado por BG936815810 sobre 2022-01-29 01:59:09

Black_Dog No I personally wouldn't recommend use around water, it may survive a light splash but isn't IP rated

2022-01-29 02:08:05 Servicial (0)
Enviar
respuestas (1)

BG144222114 Hi, I have the same product, have you found datasheet for this chip ? I will need too info on the IC

2021-12-25 03:23:49 Servicial (0)
Enviar
respuestas (2)

Q: Will this work on Ender 3 Pro which is 24v?

Preguntado por mouse742 sobre 2021-11-27 08:59:54

Black_Dog at a guess i'd say no as the head here is 12v and you require 24v, would perhaps take a look at the ender 3 website to see what the specs are.

2021-11-27 10:04:12 Servicial (0)
Enviar
respuestas (1)

Q: What is the operating power needed for this - is it EU ~240v or US 120v?

Preguntado por BG364511131 sobre 2021-09-26 05:46:00

Black_Dog Operation voltage is universal from 120v to 240v will work in either country with a suitable mains adapter or c13 or c14 power lead for your country (Kettle type lead)

2021-09-26 06:55:36 Servicial (0)
Enviar
respuestas (3)

Q: Where the battery should be attached?

Preguntado por doburden sobre 2021-08-31 09:15:27

Black_Dog Nextto the Micro USB port there are 2 small pads marked and - 5v or use the micro usb to power it.

2021-09-07 02:20:52 Servicial (0)
Enviar
respuestas (1)