Todos los mensajes

Q: Is this all that is needed to complete the wpl c24 kit?

Preguntado por racer2021 sobre 2021-02-05 02:27:01

BG251736913 Thekit is a controller, combined receiver and transmitter with sound.

2022-04-01 08:54:44 Servicial (0)
Enviar
respuestas (2)

Q: what is the kv for the motor?

Preguntado por BG344856439 sobre 2022-02-13 04:24:34

racer2021 says 4500kv in the description

2022-02-13 04:37:17 Servicial (0)
Enviar
respuestas (1)

Q: would these be small for my 1/16 e revo? or too big

Preguntado por BG501741386 sobre 2021-12-21 10:33:47

racer2021 They are smaller than erevo tires. Compare the diameter if you would like to know the difference.

2021-12-28 07:03:16 Servicial (0)
Enviar
respuestas (1)

racer2021 They are lights that hook up to a power source. You can power them in anything you like as long as you have a power source.

2021-12-28 07:02:29 Servicial (0)
Enviar
respuestas (1)

racer2021 No lights just the receiver.

2021-12-28 07:01:24 Servicial (0)
Enviar
respuestas (3)

Q: Does this come with nimh or lipo batteries?

Preguntado por BG114038575 sobre 2021-12-28 06:50:35

racer2021 Mine came with two lipo 2s Gens Ace 1800mah batteries.

2021-12-28 07:00:04 Servicial (0)
Enviar
respuestas (2)

racer2021 3s puts the motor over 55,000rpms. I believe that motor caps out at 50,000rpm's. 11.4v would put you at about 50k. With that being said you will probably be ok with 3s if you don't go full throttle until the voltage is lower.

2021-10-13 12:15:54 Servicial (2)
Enviar
respuestas (4)

Q: does this version come with all metal driveshafts and metal diffs?

Preguntado por HurkzNZL sobre 2021-08-27 11:55:49

racer2021 I can confirm as jsanfilippo1975 stated, the rear dog bones are the only metal. I have put some serious miles on mine and nothing has broken. I ordered a complete metal set of everything to go in it but haven't needed to change anything. Being all plastics makes it run really smooth and have very long battery life.

2021-08-27 01:55:32 Servicial (2)
Enviar
respuestas (7)

racer2021 I run my q902 on 3s all the time with this esc. It strips spur and pinion gears like every 5 packs or so but no issues with the esc. I use 850mah 75c 150c burst Tattu lipos with an adapter from xt60 to T-Plug. Again no electrical issues the motor gets a little warm but not bad.

2021-06-22 09:13:28 Servicial (2)
Enviar
respuestas (3)