hvorfordetda
mis contenidos
Todos los mensajes
Comentarios
Comentarios
respuestas
Preguntas

Todos los mensajes

hvorfordetda 01/06/2021
Appears to be OK. DC resistance close to 50 ohm.
5 piezas Y1078 50Ω Conector macho BNC a hembra enchufe Socket de prueba de alta frecuencia para osciloscopio
US$19.62 US$20.99
0
Recomendaciones
Comentarios (0)
MUSTOOL MT336 600V True RMS Digital Abrazadera Medidor con forma de onda AC V/A Pantalla Multímetro Osciloscopio 2 en 1 Medida de forma de onda de corriente sin contacto Prueba de diodo de capacitancia de resistencia de frecuencia
US$67.99

Q: One of the pictures shows it can display the wave form of the current measured with the clamp, but the review posted by "msobejano" indicates it can only display the waveform of voltages. What is correct?

Preguntado por hvorfordetda sobre 2020-02-28 09:07:12

ingdump It can display Amps and Volts in AC only, in DC, volts only

2021-03-26 12:25:06 Servicial (1)
Enviar
respuestas (2)
hvorfordetda 24/06/2019
First impression is that this is a good product made without cutting all corners possible. Seems like the manufacturer has tried (and meant) to make something that is meant to last. Price is not cheap, but seems quite realistic for what I got. I have only started the motor, and I can confirm that it seems to be very well balanced. The attached collet is 1/8". Don't think it is mentioned in the description. Shipping protection was very good.
Controlador de velocidad del motor del husillo sin escobillas ER11 de 500W y 48V DC para máquina CNC
US$139.74 US$145.99
1
Recomendaciones
Comentarios (0)
hvorfordetda 16/10/2020
Happy with these. Price with rebate was very good.
Kit de herramientas de cambio rápido de tipo GIB cuneiforme Machifit 250-000 Poste de herramientas 250 001-010 Portaherramientas para tornos
US$18.47 US$18.99
0
Recomendaciones
Comentarios (0)
hvorfordetda 16/10/2020
Seems to be good for the price.
MT2 ER16/20 M10 Morse Taper Collet Chuck Holder Fresado Collet Chuck Holder CNC Cutter Arbor
US$14.32 US$17.99
0
Recomendaciones
Comentarios (0)
hvorfordetda 16/10/2020
Seems to be good for the price.
Machifit 10Unids ER16 1-10mm Pinza de Resorte CNC Máquina de Tallado Pinza Mandril de Herramienta de Torno de de Fresado
US$23.09 US$23.99
0
Recomendaciones
Comentarios (0)
hvorfordetda 16/10/2020
These are good. Had three of them, and bought three more.
3uds Linterna LED Luz de Pluma Elfeland XPE 600LM AAA Mini de Cámping AAA
US$12.24 US$15.96
0
Recomendaciones
Comentarios (0)
MT2 ER16/20 M10 Morse Taper Collet Chuck Holder Fresado Collet Chuck Holder CNC Cutter Arbor
US$14.32 US$17.99

Q: I can answer myself. The threads on the nut holding the collett is M22x1,5 on the ER16 MT2 holder. The draw bar is M10x1,5 as stated by Z.

Preguntado por hvorfordetda sobre 2020-07-28 10:38:38
Enviar
respuestas (1)
MT2 ER16/20 M10 Morse Taper Collet Chuck Holder Fresado Collet Chuck Holder CNC Cutter Arbor
US$14.32 US$17.99

Q: What size is the threads for the nut on the MT2 ER16 collett? M19 x 1 or M22 x 1.5 ? Both sizes exist, so this should be stated in the description.

Preguntado por hvorfordetda sobre 2020-06-07 11:43:04

Zosterops M10*1.5

2020-07-06 04:01:52 Servicial (0)
Enviar
respuestas (1)

hvorfordetda Search eevblog dot com, and you will find some useful information about adjustment and improvements to the power supply.

BG231153916 01/02/2020
Great product for hobby work and educational purposes. It seems to work properly although seems to show ~5% higher values on both ranges than my other equipment, so could be a bit out of spec in my case. Probably can be calibrated if needed. Signal noise could be lower, but I usually take average measurements anyway, so it doesn't matter that much to me. For one shot applications, I presume it could be a bit problematic if you need to be sure what are you looking at. Haven't yet tested it at higher frequency though, but will do so, expect it to work as specified. Zeroing works great, albeit a bit fiddly. Simply the button sometimes get stuck. This is the only reason I gave it 4 stars for quality, as it could easily be solved by re-thinking the design of the physical button. Surprisingly, after proper zeroing it doesn't float that much afterwards. All in all, extremely good value. If there would be 10 for value, this product would easily get it. P.S. It can also work with UNI-T UT139C AC and DC range through a BNC to banana adapter (sold separately), just make sure to use the 1mV/100mA range on the Hantek clamp to match 10mV/A on the UT139C in case you want to use it for simple measurements.
Hantek CC65 Medidor digital de corriente CA / CC Abrazadera Multímetro Osciloscopio con BNC Conector
US$99.32 US$103.99
0
Comentarios (2)
5.0MP USB Cmos Cámara Microscopio ocular digital electrónico Controlador gratuito / Software de medición de alta resolución para WIN10 / 7/8
US$69.29 US$71.99

Q: Can I attach a C-mounth lens to this camera?

Preguntado por hvorfordetda sobre 2020-01-23 11:59:34

wuchuangbin yes

2020-02-05 09:17:22 Servicial (2)
Enviar
respuestas (1)
hvorfordetda 01/02/2020
Works OK, but could benefit from more care during manufacturing. Too many sharp edges that should have been removed before assembly given the price. It is possible to remove them by means of a 1200 grit abrasive paper. The best result will be achieved if you dismantle it. Four screws are hiding underneath the sticker with the table on the back. You can feel the holes with your finger. Both sides of the knurled screw ontop of the display, you find two small buried screws. They can benefit from some minor adjustment to thighten the sliding mechanism. If you remove them, take notice of their placement because they are slightly different. One of them is meant to fit into a small hole in the bronze leaf spring that takes up the slack. When sharp edges are removed and some minor adjustemts are taken care of, it is a quite nice caliper. Seems to be accurate and the zeroing is also OK. Nice to find extra batteries and the plastic case gives protection.
Calibrador Vernier de acero inoxidable de 150 mm con pantalla LCD de 6 pulgadas en fracciones / mm / pulgadas de acero inoxidable de alta precisión con pantalla LCD
US$15.99 US$29.99
0
Recomendaciones
Comentarios (0)
hvorfordetda 12/01/2018
These ar not good. They lack spring tension for the shield and will give very poor connection for radio frequencies.
Excellway® 10 juegos de adaptadores de conectores de crimpado de enchufe BNC para cable coaxial macho RG58 RG-58 Antena
US$19.62 US$20.99
1
Recomendaciones
Comentarios (2)
hvorfordetda 17/09/2019
Product is OK, but I would like to se a larger version of it. Lenght is OK, but width could have been about 30 - 40 cm more. Some of us are not thin, you know, and sometimes this will be used together with other thick clothes as well. This kind of apron can be useful for many kinds of work in addition to welding.
Equipo de soldadura Soldador Delantal de protección de aislamiento térmico Cuero de vaca 60x90cm
US$20.40 US$24.48
0
Recomendaciones
Comentarios (0)
hvorfordetda 11/07/2019
10ml pipette is ok. 5ml pipette is ok for the glass, but the red ballon is just a joke. Does not fit the glass and is to small to suck up 5ml. Buy some of the blue ballons in addition. Loose one star because of un-necessary extra cost. Survived shipping only by pure luck. Why does the Chinese think it is smart to wrap long, thin tubes of glass in thin layer foam only?
Piipeta de Vidrio Tubo de Transferencia Cuentagotas con Tapa de Caucho de Escala para Laboratorio
US$3.95 US$5.93
0
Recomendaciones
Comentarios (0)
Conectores neumáticos TEVO® 5PCS de 4.3 mm de diámetro PC4-M6 compatibles con tubos de PTFE de 4 mm. Conexión de acoplamiento de entrada de alimentación
US$6.57 US$8.99

Q: Do it have metal teeth on the inside to provent a good grip on the ptfe tube ?

Preguntado por ckiki sobre 2018-11-13 04:06:20

hvorfordetda Yes, it has metal teeths inside.

2019-10-10 06:29:29 Servicial (0)
Enviar
respuestas (4)
hvorfordetda 11/07/2019
Probably ok
WXD3-13-2W 10K Ohm Potenciómetro Rotatorio de Múltiple Bobinado
US$8.07 US$8.99
0
Recomendaciones
Comentarios (0)
hvorfordetda 11/07/2019
These are ok
5 unids/set pipeta azul cuentagotas bombilla de goma en forma de pera laboratorios bola de succión laboratorio herramientas
US$13.85 US$14.99
0
Recomendaciones
Comentarios (0)
hvorfordetda 26/06/2019
These are good. Small (as I need) and qite sturdy. Have been using them over long time.
50 piezas de clip para tienda de campaña al aire libre, abrazadera a prueba de viento para supervivencia, herramienta de apriete de toldo, abrazadera de lona
US$9.19 US$11.10
0
Recomendaciones
Comentarios (0)
hvorfordetda 23/10/2018
I can't prove they are fake, but they don't behave like any of the 14 other DS18B20 I have, two different batches of 7 each.. When I test them, it is impossible to have more than three of them connected to the same bus. I can have all of the other 14 I have one the same bus, and I can have 3 of the ones I got from Banggodd in addition. Regardless of how I connect them, I can not have more than 3 of them connected at the same time. Only 3 (no other DS18B20's) is OK, 4 or more does not work. None of the DS18B20's on the bus is recognized if I have more than 3 of this batch. I bought 10 items. Five are well within the tolerances, five are outside. All items respond as expected to 9, 10, 11 and 12 bit resoulution settings, and they remember the setting when powered off. If you need less than four items on a bus, they will probably be OK, but expect some errors i the temperature readings. I add a picture showing the face of the case and it's batch number.
10 sensores de temperatura DS18B20 18B20 TO-92 encapsulados
US$11.54 US$11.99
0
Recomendaciones
Comentarios (1)

Usted es el experto, ¿puede ayudarme?

¡Te invitamos sinceramente a suscribirte al correo electrónico de respuesta de invitación!

Si se suscribe, lo invitaremos por correo electrónico para que responda las preguntas que la gente tenga sobre los productos. ¡Al suscribirte, también ganarás la "Insignia útil "! Puede darse de baja en cualquier momento en la página de configuración de privacidad.

¡Ayuda a los demás y sé más feliz!

  • Suscribir

Sobre insignias

Las insignias están relacionadas con la comunidad, y los usuarios obtienen insignias creando contenido de calidad, completando misiones o participando en actividades especiales. Las personas específicas también tendrán su propia insignia exclusiva.
Insignia del CEO

La insignia del CEO es propiedad exclusiva del jefe de Banggood.

Las insignias que puedes ganar llegarán pronto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe